Hivatkozási szám

MSZ EN 288-3:1998

Dokumentumazonosító

069373

Cím

Hegesztési utasítás és a hegesztéstechnológia jóváhagyása fémekre. 3. rész: Technológiavizsgálatok acélok ívhegesztésére (tartalmazza az A1:1997 módosítást)

Angol cím

Specification and approval of welding procedures for metallic materials. Part 3: Welding procedure tests for the arc welding of steels (includes amendment A1:1997)

Alkalmazási terület

This standard specifies how a welding procedure specification is approved by welding procedure tests. It defines the conditions for the execution of welding procedure approval tests and the limits of validity of an approved welding procedure for all practical welding operations within the range of variables listed in clause 8. Tests shall be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard or contract when these shall apply. This standard applies to the arc welding of steels. The principles of this standard may be applied to other fusion welding processes subject to agreement between the contracting parties. Note: Specific service, material or manufacturing conditions may require more comprehensive testing than is specified by this standard in order to gain more information and to avoid repeating the welding procedure test at a later date just to obtain additional test data. Such tests may include: - longitudinal weld tensile test; - all weld metal bend test; - Charpy V-notch impact test; - yield strength or 0,2 % proof stress; - elongation; - chemical analysis; - micro examination; - delta ferrite determination in austenitic stainless steels. Arc welding is covered by the following processes in accordance with EN 24063: 111 - metal-arc welding with covered electrode; 114 - flux-cored wire metal-arc welding without gas shield; 121 - submerged arc welding with wire electrode;1) 122 - submerged arc welding with strip electrode;1) 131 - metal-arc inert gas welding (MIG welding); 135 - metal-arc active gas welding (MAG welding); 136 - flux-cored wire metal-arc welding with active gas shield; 141 - tungsten inert gas arc welding (TIG welding); 15 - plasma arc welding; other fusion welding processes by agreement e.g. metal cored wire arc welding. 1. As modified by Amendment A1 :1997

ICS

25.160.10 Hegesztőeljárások

Műszaki Bizottság

A szabvány nyelve

magyar

Az érvényesség kezdete

1998-12-01

A visszavonás napja

2004-12-01

Forrás

idt EN 288-3:1992/A1:1997; idt EN 288-3:1992

Előd

MSZ EN 288-3:1993, MSZ EN 288-3:1992/A1:1998

Utód

MSZ EN ISO 15614-1:2004

Módosítás

SZK-közlemények

2001/05: Helyesbítés

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 226872) ,

oldalszáma

40 oldal; R kategória

ára

Nettó: 14180 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 17867 Ft
PDF (letöltés) formátum esetén (27% Áfával): 18009 Ft