Hivatkozási szám

MSZ EN ISO 11300-1:2026

Dokumentumazonosító

189302

Cím

Csővezetékrendszerek a föld alatti alagcső-, csatorna- és vízellátó hálózatok helyreállításához. 1. rész: Polietilén (PE-) anyag (ISO 11300-1:2026)

Angol cím

Piping systems for rehabilitation of underground drains, sewers and water supply networks. Part 1: Polyethylene (PE) material (ISO 11300-1:2026)

Alkalmazási terület

This document specifies requirements and test methods for pipes and fittings which are part of piping systems for the rehabilitation, by means of renovation and trenchless replacement, of underground non-pressure and pressure drains and sewers and water supply networks, which transport water intended for human consumption, including raw water pipelines. It is applicable to polyethylene (PE) pipes, fittings and assemblies, as manufactured and as installed. It is not applicable to the existing pipeline. It is applicable to the following technique families for renovation, intended to be used at an operating temperature of 20 °C as the reference temperature: — lining with continuous pipes; — lining with close-fit pipes. This document is applicable to the following technique families for trenchless replacement, intended to be used at an operating temperature of 20 °C as the reference temperature: — pipe bursting and pipe extraction; — horizontal directional drilling and impact moling. NOTE For applications operating at constant temperatures greater than 20 °C and up to 40 °C, see ISO 4427-1:2019, Annex A. When used with lining with continuous pipes, lining with close-fit pipes and trenchless replacement technique families, this document is applicable to: — PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes; — PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex D, where all layers have the same MRS rating. Furthermore, when used with lining with continuous pipes and trenchless replacement this document is applicable to: — PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), as specified in Annex D. This document is applicable to jointing by means of butt fusion and electrofusion and to fabricated and injection-moulded fittings and mechanical connections of PE.

ICS

23.040.20 Műanyag csövek

23.040.45 Műanyag csőidomok

91.140.80 Vízelvezető rendszerek

93.025 Külső vízvezetékrendszerek

93.030 Külső szennyvízrendszerek

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2026-08-01

Forrás

idt EN ISO 11300-1:2026; idt ISO 11300-1:2026

Előd

MSZ EN ISO 11296-2:2018, MSZ EN ISO 11297-2:2018, MSZ EN ISO 11298-2:2018, MSZ EN ISO 11296-1:2018, MSZ EN ISO 11297-1:2018, MSZ EN ISO 11298-1:2018, MSZ EN ISO 21225-1:2018, MSZ EN ISO 21225-2:2018, MSZ EN ISO 11296-3:2019, MSZ EN ISO 11297-3:2019, MSZ EN ISO 11298-3:2019

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1783238) ,

oldalszáma

54 oldal; U kategória

ára

Nettó: 23030 Ft
Bruttó:
Papír formátum esetén (25% nyomdai költséggel, 5% Áfával): 30227 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 29248 Ft