Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 15850 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN ISO 15614-1:2017
Dokumentumazonosító
666437
Cím
Fémek hegesztési utasítása és hegesztéstechnológiájának minősítése. A hegesztéstechnológia vizsgálata. 1. rész: Acélok ív- és lánghegesztése, valamint nikkel és ötvözetei ívhegesztése (ISO 15614-1:2017)
Angol cím
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
Alkalmazási terület
This document specifies how a preliminary welding procedure specification is qualified by welding procedure tests. This document applies to production welding, repair welding and build-up welding. This document defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the qualification of this document. The primary purpose of welding procedure qualification is to demonstrate that the joining process proposed for construction is capable of producing joints having the required mechanical properties for the intended application. Two levels of welding procedure tests are given in order to permit application to a wide range of welded fabrication. They are designated by levels 1 and 2. In level 2, the extent of testing is greater and the ranges of qualification are more restrictive than in level 1. Procedure tests carried out to level 2 automatically qualify for level 1 requirements, but not vice-versa. When no level is specified in a contract or application standard, all the requirements of level 2 apply. This document applies to the arc and gas welding of steels in all product forms and the arc welding of nickel and nickel alloys in all product forms. Arc and gas welding are covered by the following processes in accordance with ISO 4063. 111 — manual metal arc welding (metal-arc welding with covered electrode); 114 — self-shielded tubular-cored arc welding; 12 — submerged arc welding; 13 — gas-shielded metal arc welding; 14 — gas-shielded arc welding with non-consumable electrode; 15 — plasma arc welding; 311 — oxy-acetylene welding. The principles of this document may be applied to other fusion welding processes. NOTE A former process number does not require a new qualification test according to this document. Specification and qualification of welding procedures that were made in accordance with previous editions of this document may be used for any application for which the current edition is specified. In this case, the ranges of qualification of previous editions remain applicable. It is also possible to create a new WPQR (welding procedure qualification record) range of qualification according to this edition based on the existing qualified WPQR, provided the technical intent of the testing requirements of this document has been satisfied. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to perform the additional test on a test piece.
ICS
25.160.10 Hegesztőeljárások
A szabvány nyelve
angol
Az érvényesség kezdete
2017-11-01
További adatok
Forrás
idt EN ISO 15614-1:2017; idt ISO 15614-1:2017
Utód
SZK-közlemények
2018/02: Helyesbítés
Kapcsolódó európai jogszabály
97/23/EK; (PRE97); 2009/105/EK; (SPV09); 2014/29/EU (SPV14)
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 866171) ,
oldalszáma
49 oldal; T kategória
ára
Nettó: 15850 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 19971 Ft
PDF (letöltés) formátum esetén (27% Áfával): 20130 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN ISO 15614-1:2017

2017-11-01

Utódok

Jelenleg nincsenek utódok