Hivatkozási szám

MSZ EN 15316-4-3:2017

Dokumentumazonosító

166232

Cím

Épületek energetikai teljesítőképessége. A rendszer energetikai követelményeinek és hatékonyságának számítási módszere. 4-3. rész: Hőtermelő, termikus napenergia-hasznosító és fotovillamos rendszerek, M3-8-3, M8-8-3, M11-8-3 modul

Angol cím

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3

Alkalmazási terület

This European Standard specifies the: — required inputs; — calculation method; — required and resulting outputs, for heat generation systems, thermal solar systems (for space heating, domestic hot water production and the combination of both) and for photovoltaic systems applied in buildings. Within this standard, 6 methods are specified each method has its own range of applicability. — Method 1, is applicable for solar domestic hot water systems characterized by the EN 12976 series (factory made) or EN 12977-2 (custom built). The main output of the method is the solar heat and back up heat contribution to the requested heat use. — Method 2, is applicable for systems for domestic hot water and / or space heating with components characterized by EN ISO 9806 and EN 12977-3 or EN 12977-4 with a monthly calculation time step. The main output of the method is the solar heat and back up heat contribution to the requested heat use. — Method 3, is applicable for systems for domestic hot water and / or space heating with components characterized by EN ISO 9806 with an hourly calculation time step. The main output of the method is collector loop heat supplied to the heat storage. — Method 4, is applicable for photovoltaic systems with components characterized by standards and with an annual calculation time step. The output of the method is the produced electricity. — Method 5, is applicable for photovoltaic systems with components characterized by standards and with a monthly calculation time step. The output of the method is the produced electricity. — Method 6, is applicable for photovoltaic systems with components characterized by standards and with a calculation time step. The output of the method is the produced electricity. These three last calculation methods do not take into account: — electrical storage; — PV/thermal photovoltaic systems. Primary energy savings and CO2 savings, which can be achieved by photovoltaic systems compared to other systems, are calculated according to EN ISO 52000-1. NOTE 1 Standards linked to the methods are listed in Annex E. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1. NOTE 2 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 3 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

ICS

27.160 Napenergia

91.140.10 Központi fűtési rendszerek

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2017-10-01

Forrás

idt EN 15316-4-3:2017

Előd

MSZ EN 15316-4-3:2008, MSZ EN 15316-4-6:2008

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

(ENL11); 2010/31/EU AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2010/31/EU IRÁNYELVE (2010. május 19.) az épületek energiahatékonyságáról (átdolgozás) (BUIL1); (E-E06); (ECO17)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 2650342) ,

oldalszáma

105 oldal; XA kategória

ára

Nettó: 23380 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 29459 Ft
PDF (letöltés) formátum esetén (27% Áfával): 29693 Ft