Hivatkozási szám

MSZ EN 14405:2017

Dokumentumazonosító

165592

Cím

Hulladékok jellemzése. Kioldódási tulajdonságok vizsgálata. Felfelé áramlásos perkolációs vizsgálat (meghatározott körülmények között)

Angol cím

Characterization of waste. Leaching behaviour test. Up-flow percolation test (under specified conditions)

Alkalmazási terület

This European Standard is applicable for determining the leaching behaviour of inorganic and non-volatile organic substances from granular waste (without or with size reduction (see 7.2)). The waste body is subjected to percolation with water as a function of liquid to solid ratio under specified percolation conditions. The waste is leached under hydraulically dynamic conditions. The method is a once-through column leaching test and the test results establish the distinction between different release patterns, for instance wash-out and release under the influence of interaction with the matrix, when approaching local equilibrium between waste and leachant. This test method produces eluates, which can subsequently be characterized by physical, chemical and ecotoxicological methods according to existing standard methods. NOTE 1 The mentioned specified percolation conditions are arbitrary and are not necessarily simulating a specific scenario. NOTE 2 Waste materials that show a saturated hydraulic conductivity between 10-7 m/s and 10-8 m/s can be subjected to this test, but it can be difficult to maintain the imposed flow rate. If a waste shows a saturated hydraulic conductivity below 10-8 m/s, the test will preferably not be carried out (See C.5 for a definition of ‘hydraulic conductivity’). NOTE 3 This procedure is generally not applicable to biologically degrading materials and materials reacting with the leachant, leading, for example, to excessive gas emission or excessive heat release. NOTE 4 This procedure is applicable to materials showing solidification in the column, if the final hydraulic conductivity is within the specified range (see NOTE 2). NOTE 5 It is not always possible to optimise test conditions simultaneously for inorganic and non-volatile organic substances and optimum test conditions may also vary between different groups of non-volatile organic substances. Test requirements for non-volatile organic substances are generally more stringent than those for inorganic constituents. The test conditions suitable for measuring the release of non-volatile organic substances will generally also be applicable to inorganic substances. NOTE 6 For ecotoxicological testing, eluates representing the release of both inorganic and non-volatile organic substances are needed. In this standard ecotoxicological testing is meant to include also genotoxicological testing. NOTE 7 Validation data for non-volatile organic substances are not currently available, but will be added on revision when available.

ICS

13.030.10 Szilárd hulladékok

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2017-07-01

Forrás

idt EN 14405:2017

Előd

MSZ CEN/TS 14405:2007

Utód

Módosítás

SZK-közlemények

Kapcsolódó európai jogszabály

99/31/EK A TANÁCS 1999/31/EK IRÁNYELVE (1999. április 26.) a hulladéklerakókról (LOW)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1933941) ,

oldalszáma

42 oldal; S kategória

ára

Nettó: 15070 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 18988 Ft
PDF (letöltés) formátum esetén (27% Áfával): 19139 Ft