Hivatkozási szám

MSZ EN 303 978:2016

Dokumentumazonosító

163803

Cím

Műholdas földi állomások és rendszerek (SES). A 2014/53/EU irányelv 3. cikke (2) bekezdésének alapvető követelményeit tartalmazó, harmonizált szabvány a geostacionárius pályán keringő műholdak felé sugárzó, a 27,5 GHz-től 30,0 GHz-ig terjedő frekvenciasávban működő, mozgó hordozóra telepített földi állomások (ESOMP) számára

Angol cím

Satellite Earth Stations and Systems (SES). Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

Alkalmazási terület

The present document applies to Earth Stations on Mobile Platforms (ESOMP), which have the following characteristics. Ábra • The ESOMP is designed for both mobile and stationary operation. • The ESOMP operates on various mobile platforms such as trains, maritime vessels, aircraft and other vehicles and, therefore, may be subject to occasional disturbances and interruptions in the satellite link. • The ESOMP is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution and/or exchange of information. • The ESOMP is comprised of all the equipment, electrical and mechanical, from the antenna itself to the interface with other communications equipment on a mobile platform (usually referred to as the terrestrial interface). • The transmit and receive frequencies are shown in table 1. táblázat • The ESOMP transmits within the frequency range from 27,50 GHz to 30,00 GHz, which is a band allocated to the Fixed Satellite Services (FSS) (Earth-to-space) among other services. However, operation of the ESOMP is intended to be restricted to the frequency range 29,50 GHz to 30,00 GHz in and near those countries that have allocated Fixed Service (FS) to the other frequency ranges. Local regulation may permit operation in these frequency ranges. • The ESOMP receives in one or more frequencies within the range from 17,30 GHz to 20,20 GHz (FSS). • The ESOMP uses linear or circular polarization. • The ESOMP operates through a geostationary satellite (or a cluster of co-located geostationary satellites) that is at least 2° away from any other geostationary satellite operating in the same frequencies and over the same coverage area. NOTE 1: ESOMPs may operate with satellites that are more closely spaced than 2° with additional operational constraints that are beyond the scope of the present document. • The ESOMP is designed for unattended operation. • The ESOMP is controlled and monitored by a Network Control Facility (NCF). This function may be performed centrally (e.g. for a network of ESOMPs with a central hub) or it could be performed within the ESOMP for autonomous control. The NCF is outside the scope of the present document. The present document applies to the ESOMP with its ancillary equipment and its various telecommunication ports, and when operated within the boundary limits of the operational environmental profile as declared by the applicant and when installed as required by the applicant's declaration or in the user documentation. The present document is intended to cover the provisions of Directive 2014/53/EU [6] (RE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference". NOTE 2: Operational requirements are defined by national administrations and by relevant ECC Decisions. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Directive 2014/53/EU [6] may apply to equipment within the scope of the present document. NOTE 3: A list of such ENs is included on the web site http://www.newapproach.org/.

ICS

33.060.30 Közvetítő rádióállomások és állandó, műholdas kommunikációs rendszerek

33.070.40 Műholdak

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2016-10-01

A visszavonás napja

2017-03-01

Forrás

idt EN 303 978:2016-05

Előd

MSZ EN 303 978:2013

Utód

MSZ EN 303 978:2017

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2014/53/EU (RTTE14); 1999/5/EK; (RTTE99)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 822072) ,

oldalszáma

75 oldal; W kategória

ára

Nettó: 19470 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 24532 Ft
PDF (letöltés) formátum esetén (27% Áfával): 24727 Ft