Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 12520 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN 1751:2014
Dokumentumazonosító
157960
Cím
Épületek szellőztetése. Légelosztó központok. Záró- és szabályozószerelvények áramlástani vizsgálata
Angol cím
Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves
Alkalmazási terület
This European Standard specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa. The tests incorporated in this European Standard are: a) leakage past a closed damper or valve (for classification see Annex C); b) casing leakage (for classification see Annex C); c) flow rate/pressure requirement characteristics; d) torque: (see Annex A); e) thermal transmittance: (see Annex B). The acoustic testing of dampers and valves is not included in this European Standard. The tests specified above apply to the following: f) measurement of leakage past a closed damper or valve; g) measurement of casing leakage; h) determination of flow rate and pressure requirements; i) measurement of torque characteristics (see Annex A); j) measurement of thermal transfer characteristics to determine insulation properties (see Annex B). NOTE Certain aspects of the dynamic performance of dampers or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this European Standard. Also, in common with other air distribution components, the results from tests carried out in accordance with this European Standard may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.
ICS
91.140.30 Szellőztető- és légkondicionáló rendszerek
A szabvány nyelve
angol
Az érvényesség kezdete
2014-05-01
További adatok
Forrás
idt EN 1751:2014
Utód
Módosítás
SZK-közlemények
Kapcsolódó európai jogszabály
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 792321) ,
oldalszáma
30 oldal; P kategória
ára
Nettó: 12520 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 15775 Ft
PDF (letöltés) formátum esetén (27% Áfával): 15900 Ft
Szabvány életútja
Elődök
Megtekintett szabvány

MSZ EN 1751:2014

2014-05-01

Utódok

Jelenleg nincsenek utódok