Hivatkozási szám

MSZ EN 61094-8:2013

Dokumentumazonosító

154898

Cím

Elektroakusztika. Mérőmikrofonok. 8. rész: Szabványos üzemi mikrofonok szabadtéri kalibrációja összehasonlító módszerrel (IEC 61094-8:2012)

Angol cím

Electroacoustics. Measurement microphones. Part 8: Methods for free-field calibration of working standard microphones by comparison (IEC 61094-8:2012)

Alkalmazási terület

This part of the IEC 61094 series is applicable to working standard microphones meeting the requirements of IEC 61094-4. It describes methods of determining the free-field sensitivity by comparison with a laboratory standard microphone or working standard microphone (where applicable) that has been calibrated according to either: – IEC 61094-3, – IEC 61094-2 or IEC 61094-5, and where factors given in IEC/TS 61094-7 have been applied, – IEC 61094-6, – this part of IEC 61094. Methods performed in an acoustical environment that is a good approximation to an ideal free-field (e.g. a high quality free-field chamber), and methods that use post processing of results to minimise the effect of imperfections in the acoustical environment, to simulate freefield conditions, are both covered by this part of IEC 61094. Comparison methods based on the principles described in IEC 61094-3 are also possible but beyond the scope of this part of IEC 61094. NOTE 1 This part of IEC 61094 is also applicable to laboratory standard microphones meeting the requirements of IEC 61094-1, noting that these microphones also meet the electroacoustic specifications for working standard microphones. NOTE 2 This part of IEC 61094 is also applicable to combinations of microphone and preamplifier where the determined sensitivity is referred to the unloaded output voltage of the preamplifier. NOTE 3 Other devices, for example, sound level meters can be calibrated using the principles of this part of IEC 61094, but are not within the scope of this standard.

ICS

17.140.50 Elektroakusztika

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2013-03-01

Forrás

idt IEC 61094-8:2012; idt EN 61094-8:2012; idt EN 61094-8:2012/AC:2013

Előd

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

2013/04: Helyesbítés

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 790093) ,

oldalszáma

31 oldal; P kategória

ára

Nettó: 12520 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 15775 Ft
PDF (letöltés) formátum esetén (27% Áfával): 15900 Ft