Hivatkozási szám

MSZ EN 61508-6:2010

Dokumentumazonosító

150584

Cím

Villamos/elektronikus/programozható elektronikus biztonsági rendszerek működési biztonsága. 6. rész: Az IEC 61508-2 és az IEC 61508-3 alkalmazásának irányelvei (IEC 61508-6:2010)

Angol cím

Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (IEC 61508-6:2010)

Alkalmazási terület

1.1 This part of IEC 61508 contains information and guidelines on IEC 61508-2 and IEC 61508-3. – Annex A gives a brief overview of the requirements of IEC 61508-2 and IEC 61508-3 and sets out the functional steps in their application. – Annex B gives an example technique for calculating the probabilities of hardware failure and should be read in conjunction with 7.4.3 and Annex C of IEC 61508-2 and Annex D. – Annex C gives a worked example of calculating diagnostic coverage and should be read in conjunction with Annex C of IEC 61508-2. – Annex D gives a methodology for quantifying the effect of hardware-related common cause failures on the probability of failure. – Annex E gives worked examples of the application of the software safety integrity tables specified in Annex A of IEC 61508-3 for safety integrity levels 2 and 3. 1.2 IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.3 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are also intended for use as stand-alone publications. The horizontal safety function of this international standard does not apply to medical equipment in compliance with the IEC 60601 series. 1.3 One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the publications prepared by those technical committees. 1.4 Figure 1 shows the overall framework of the IEC 61508 series and indicates the role that IEC 61508-6 plays in the achievement of functional safety for E/E/PE safety-related systems. Ábra

ICS

25.040.40 Ipari folyamatok mérése és vezérlése

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2010-11-01

Forrás

idt IEC 61508-6:2010; idt EN 61508-6:2010

Előd

MSZ EN 61508-6:2002

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1519014) ,

oldalszáma

112 oldal; XA kategória

ára

Nettó: 23380 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 29459 Ft
PDF (letöltés) formátum esetén (27% Áfával): 29693 Ft