Hivatkozási szám

MSZ EN ISO 15618-1:2002

Dokumentumazonosító

121654

Cím

A hegesztők minősítése víz alatti hegesztésre. 1. rész: Hegesztőbúvárok túlnyomásos nedves hegesztésre (ISO 15618-1:2001)

Angol cím

Qualification testing of welders for under-water welding. Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001)

Alkalmazási terület

This standard applies to welding processes where the skill of the diver-welder has a significant influence on weld quality. This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of diver-welder performance for the welding of steels underwater in hyperbaric wet environment. The recommended format for the certificate of approval testing is given in Annex A. During the approval test the diver-welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved, information on these aspects is given in Annex B. This standard is applicable when the diver-welder's testing is required by the purchaser, by inspection authorities or by other organisations. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanised welding. It does not cover fully mechanised and fully automatic processes (see 5.2). All new approvals should be in accordance with this standard from the date of this issue. However, this standard does not invalidate previous diver-welder approvals made to former national standards or specifications, providing the intent of the technical requirements is satisfied and the previous approvals are relevant to the application and production work on which they are employed. Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary to do the additional tests on a test piece which should be made in accordance with this standard.

ICS

25.160.10 Hegesztőeljárások

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2002-07-01

A visszavonás napja

2017-03-01

Forrás

idt EN ISO 15618-1:2001; idt ISO 15618-1:2001

Előd

Utód

MSZ EN ISO 15618-1:2017

Módosítás

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 404947) ,

oldalszáma

27 oldal; N kategória

ára

Nettó: 11980 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 15095 Ft
PDF (letöltés) formátum esetén (27% Áfával): 15215 Ft