Hivatkozási szám

MSZ EN IEC 60730-2-23:2025

Dokumentumazonosító

186788

Cím

Automatikus villamos szabályozó- és vezérlőkészülékek. 2-23. rész: Villamos érzékelők és érzékelőelemek kiegészítő követelményei (IEC 60730-2-23:2025)

Angol cím

Automatic electrical controls. Part 2-23: Particular requirements for electrical sensors and sensing elements (IEC 60730-2-23:2025)

Alkalmazási terület

This clause of Part 1 is applicable except as follows. Replacement: This part of IEC 60730 applies to the safety of electrical, electro-mechanical and electronic sensors including sensing elements and any conditioning circuitry. Sensors covered under the scope of this document serve only to transform an activating quantity into a usable output and do not perform a control operation as defined in IEC 60730-1. This document applies to sensors in so far as defining the reliability and accuracy of their inherent operating characteristics and corresponding response under normal and abnormal conditions within the sensor. Sensors, as defined herein, are used in or as part of an automatic electrical control or as independently mounted devices in connection with controls and control systems. The use of this document for other applications in which sensors are used is possible provided that the appropriate safety is maintained as defined by the end product standard. This document applies to discrete sensors constructed of, but not limited to, conductive or semiconductive substrate, for the detection of activating quantities such as voltage, current, temperature, pressure, humidity, light (e.g. optical), gasoline vapours, and the like. NOTE 1 Future consideration will be given to other sensor technologies such as chemical, mechanical and micro-electromechanical systems (MEMS), along with other activating quantities like mass flow, liquid, movement, weight, vibration, or other as needed. This document applies to sensing element(s) as well as any electronic hardware, software, or other conditioning circuits that are inherent to the sensor and relied upon to reliably transform the input signal into a useable response signal (output) for functional safety purposes. Conditioning circuits that are inseparable from the control for which the sensing element relies upon to perform its desired function are evaluated by the requirements of the relevant control Part 2 standard and/or IEC 60730-1. NOTE 2 Additional requirements can be also applied by the application standard in which the sensor is used. Throughout this document, whenever it is indicated that the IEC 60730-1 requirements are applicable, the term "control(s)", is replaced by the term "sensor(s)", and the term "equipment" is replaced by the term "control", as they are used in IEC 60730-1, respectively, unless otherwise specified herein. This document does not apply to sensors explicitly described in another relevant part 2 of the IEC 60730 series. NOTE 3 For example, a flame sensor as described in IEC 60730-2-5.

ICS

97.120 Automatikus vezérlések háztartási alkalmazásra

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2025-11-01

Forrás

idt EN IEC 60730-2-23:2025; idt IEC 60730-2-23:2025

Előd

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1368504) ,

oldalszáma

36 oldal; R kategória

ára

Nettó: 16310 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 20551 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 20714 Ft