Hivatkozási szám

MSZ EN IEC 62127-2:2025

Dokumentumazonosító

186063

Cím

Ultrahang. Hidrofonok. 2. rész: Kalibrálás ultrahangterek esetén (IEC 62127-2:2025)

Angol cím

Ultrasonics. Hydrophones. Part 2: Calibration for ultrasonic fields (IEC 62127-2:2025)

Alkalmazási terület

This part of IEC 62127 specifies: - absolute hydrophone calibration methods; - relative (comparative) hydrophone calibration methods. Recommendations and references to accepted literature are made for the various relative and absolute calibration methods in the frequency range covered by this document. This document is applicable to - hydrophones used for measurements made in water and in the ultrasonic frequency range 50 kHz to 100 MHz; NOTE 1 Although some physiotherapy medical applications of medical ultrasound are developing which operate in the frequency range 40 kHz to 100 kHz, the primary frequency range of diagnostic imaging remains above 2 MHz. It has recently been established that, even in the latter case, the hydrophone response at substantially lower frequencies can influence measurements made of key acoustic parameters [4]. NOTE 2 Calibration methods for underwater acoustics hydrophones applicable in the frequency range from 200 Hz to 1 MHz are available in IEC 60565-1 [2], and for frequencies from 0,01 Hz to several kilohertz in IEC 60565-2 [3]. - hydrophones employing piezoelectric sensor elements, designed to measure the pulsed wave and continuous wave ultrasonic fields generated by ultrasonic equipment; NOTE 3 Some hydrophones can have non-circular active elements, arising from slight deviations from a circular structure caused, for example, by electrode structure; or, conversely, the active elements can actually be squares. It is important in these cases to pay special attention to the directional response and to the effective radii of the active element through various axes of rotation. - hydrophones with or without a hydrophone pre-amplifier.

ICS

17.140.50 Elektroakusztika

A szabvány nyelve

angol

Az érvényesség kezdete

2025-07-01

Forrás

idt EN IEC 62127-2:2025; idt IEC 62127-2:2025

Előd

MSZ EN 62127-2:2008, MSZ EN 62127-2:2007/A1:2013, MSZ EN 62127-2:2007/A2:2017

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 3970824) ,

oldalszáma

118 oldal; XC kategória

ára

Nettó: 32940 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 41504 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 41834 Ft