Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 20030 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN ISO 22476-16:2025
Dokumentumazonosító
185670
Cím
Geotechnikai feltárások és vizsgálatok. Terepi vizsgálatok. 16. rész: Furat nyíróvizsgálata (ISO 22476-16:2024)
Angol cím
Geotechnical investigation and testing. Field testing. Part 16: Borehole shear test (ISO 22476-16:2024)
Alkalmazási terület
This document is applicable to the borehole shear test using the phicometer procedure, commonly named the phicometer test (etymologically derived from phi for friction angle, co for cohesion and meter for measurement). The test can be performed in all types of natural soils, fills and artificial soils, which can be saturated or not. It does not apply to very soft fine soils, very loose coarse soils, medium strong to very strong rocks and natural or artificial soils with a predominance of cobbles having a particle diameter greater than 150 mm. Generally, the test is applicable in soils with an order of magnitude of their in situ resistance characteristics as follows: — Ménard pressuremeter limit pressure: 0,4 MPa < plM < 3,5 MPa approximately or more than 4 MPa in granular non-cohesive soils; — CPT Cone resistance: 1,5 MPa <qc <15 MPa approximately, depending on the type of soil (see Annex E); — SPT N: 8 <N <50 approximately, depending on the type of soil (see Annex E). The test can also be carried out in soils presenting a resistance outside these application limits as long as the representativeness of the results is assessed or validated by the analysis of the PBST graphs (see Clause 8). This document applies only to tests carried out at a depth less than or equal to 30 m. The parameters derived from this test are the shear strength properties, as the cohesion and angle of friction.
ICS
93.020 Földmunkák. Földkiemelés. Alapozásépítés. Föld alatti munkák
A szabvány nyelve
angol
Az érvényesség kezdete
2025-05-01
További adatok
Forrás
idt EN ISO 22476-16:2024; idt ISO 22476-16:2024
Előd
Utód
Módosítás
Kiegészítő információk
SZK-közlemények
Kapcsolódó európai jogszabály
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 4484586) ,
oldalszáma
51 oldal; U kategória
ára
Nettó: 20030 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 25238 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 25438 Ft
Szabvány életútja
Elődök

Jelenleg nincsenek előzmények

Megtekintett szabvány

MSZ EN ISO 22476-16:2025

2025-05-01

Utódok

Jelenleg nincsenek utódok