Hivatkozási szám

MSZ EN IEC 61869-1:2025

Dokumentumazonosító

185288

Cím

Mérőtranszformátorok. 1. rész: Általános követelmények (IEC 61869-1:2023)

Angol cím

Instrument transformers. Part 1: General requirements (IEC 61869-1:2023)

Alkalmazási terület

This part of IEC 61869 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications. NOTE 1 A bushing type current transformer, although having no primary insulation level for itself is often placed on a system with a nominal voltage > 1 kV AC or > 1,5 kV DC and therefore falls within the scope of this document. Example: CT placed around an HV bushing or a cable. The general requirements for instrument transformers for applications in LV systems (nominal voltage ? 1 kV AC or ? 1,5 kV DC) are covered by IEC 61869-201. This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard. This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signals. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation. This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7. In the case of an LPIT, the general block diagram of single-phase devices is given in Figure 1. According to the technology, it is not always necessary that all parts described in Figure 1 be included in the instrument transformer. NOTE 2 A secondary power supply can be combined with a primary power supply or with a power supply of other instrument transformers.

ICS

17.220.20 Villamos és mágneses mennyiségek mérése

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2025-03-01

Forrás

idt EN IEC 61869-1:2024; idt IEC 61869-1:2023

Előd

MSZ EN 61869-1:2009, MSZ EN 61869-6:2017

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2014/30/EU (EMC14); 2014/35/EU (LVD14)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 5124405) ,

oldalszáma

150 oldal; XD kategória

ára

Nettó: 38350 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 48321 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 48705 Ft