Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 26890 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN 1997-1:2025
Dokumentumazonosító
185103
Cím
Eurocode 7: Geotechnikai tervezés. 1. rész: Általános szabályok
Angol cím
Eurocode 7. Geotechnical design. Part 1: General rules
Alkalmazási terület
1.1 Scope of EN 1997-1 (1) This document provides general rules for the design and verification of geotechnical structures. (2) This document is applicable for the design and verification of geotechnical structures outside the scope of EN 1997-3. NOTE In this case, additional or amended provisions can be necessary. 1.2 Assumptions (1) In addition to the assumptions given in EN 1990, the provisions of EN 1997 (all parts) assume that: - ground investigations are planned by individuals or organisations with knowledge of potential ground and groundwater conditions; - ground investigations are executed by individuals with appropriate skills and experience; - the evaluation of test results and derivation of ground properties from the ground investigation are carried out by individuals with appropriate geotechnical experience and qualifications; - the data required for design are collected, recorded, and interpreted by appropriately qualified and experienced individuals; - geotechnical structures are designed and verified by individuals with appropriate qualifications and experience in geotechnical design; - adequate continuity and communication exist between the individuals involved in data collection, design, verification and execution. (2) This document is intended to be used in conjunction with EN 1990, which establishes principles and requirements for the safety, serviceability, robustness, and durability of structures, including geotechnical structures, and other construction works. NOTE Additional or amended provisions can be necessary for assessment of existing structures, see EN 1990-2. (3) This document is intended to be used in conjunction with EN 1997-2, which gives provisions for determining ground properties from ground investigations. (4) This document is intended to be used in conjunction with EN 1997-3, which gives specific rules for the design and verification of certain types of geotechnical structures. (5) This document is intended to be used in conjunction with other Eurocodes for the design of geotechnical structures, including temporary geotechnical structures.
ICS
91.010.30 Műszaki szempontok
93.020 Földmunkák. Földkiemelés. Alapozásépítés. Föld alatti munkák
A szabvány nyelve
angol
Az érvényesség kezdete
2025-02-01
További adatok
Forrás
idt EN 1997-1:2024
Utód
Módosítás
Kiegészítő információk
Bizottsági állásfoglalás: Ez a szabvány a második generációs Eurocode-családhoz tartozik, amelynek összes eleme várhatóan 2027. októberig elkészül. Az egyes szabványok nemzeti bevezetése a kiadásuktól függően folyamatosan történik. Az első generációs Eurocode-szabványok 2028. április 1-jén visszavonásra kerülnek, erre az időpontra a második generációs Eurocode-szabványok ismerete a zökkenőmentes átállás érdekében elengedhetetlen. A két szabványgeneráció vegyes alkalmazása nem javasolt, kivéve, ha az adott tervezési feladathoz szükséges második generációs szabvány hivatkozásai ezt lehetővé teszik, pl. az összes hozzá kapcsolódó második generációs szabvány már rendelkezésre áll nemzeti szinten.
SZK-közlemények
Kapcsolódó európai jogszabály
305/2011/EU; (CPR11)
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 4290223) ,
oldalszáma
101 oldal; XA kategória
ára
Nettó: 26890 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 33881 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 34150 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN 1997-1:2025

2025-02-01

Utódok

Jelenleg nincsenek utódok