Hivatkozási szám

MSZ EN IEC 61535:2024

Dokumentumazonosító

184819

Cím

Berendezési csatlakozópárok rögzített villamos szerelések állandó csatlakoztatására (IEC 61535:2023)

Angol cím

Installation couplers intended for permanent connection in fixed installations (IEC 61535:2023)

Alkalmazási terület

This document applies to two-wire, up to five-wire installation couplers, with or without earthing contact, if provided, with a rated voltage up to and including 500 V AC or 500 V DC and a rated connecting capacity up to and including 10 mm2 and a rated current not exceeding 32 A for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. An installation coupler consists of an installation female connector and an installation male connector for permanent connection not intended to be engaged or disengaged under load nor to be engaged or disengaged other than during first installation or during reconfiguration or maintenance of the wiring system in which installation couplers have been installed. This means that installation couplers are intended for infrequent use only. Installation couplers are not suitable for use in place of socket-outlet systems. Installation couplers are not suitable for use in place of devices for connecting luminaires (DCLs) according to IEC 61995 (all parts) or in place of luminaire supporting couplers (LSCs). Installation couplers complying with this document are suitable for use at ambient temperatures not normally exceeding +40 °C, but their average over a period of 24 h does not exceed +35 °C, with a lower limit of the ambient air temperature of -5 °C, either for indoor or outdoor use. NOTE 1 Additional tests for use in cold climates are shown in Annex F, which is normative in following countries: FI. Necessary information can be given in the manufacturer's installation instructions. NOTE 2 For other temperatures, necessary information can be given in the manufacturer's installation instructions. In locations where special conditions prevail, as in ships, vehicles and the like and in hazardous locations, for example where explosions are liable to occur, special constructions can be required. NOTE 3 Installation couplers are intended to be installed by instructed or skilled persons. NOTE 4 As a guide to using installation coupler systems, see Annex D.

ICS

29.120.99 Egyéb villamos tartozékok

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2024-12-01

Forrás

idt EN IEC 61535:2024; idt IEC 61535:2023

Előd

MSZ EN IEC 61535:2020

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2014/35/EU (LVD14)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1961301) ,

oldalszáma

62 oldal; V kategória

ára

Nettó: 18390 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 23171 Ft
PDF (letöltés) formátum esetén (27% Áfával): 23355 Ft