Hivatkozási szám

MSZ EN 124-2:2015

Dokumentumazonosító

661814

Cím

Gyalogos- és gépjárműforgalmi területeken alkalmazott víznyelőrácsok és aknafedlapok. 2. rész: Öntöttvas víznyelőrácsok és aknafedlapok

Angol cím

Gully tops and manhole tops for vehicular and pedestrian areas. Part 2: Gully tops and manhole tops made of cast iron

Alkalmazási terület

This European Standard is applicable to gully tops and manhole tops made of flake graphite cast iron and/or spheroidal graphite cast iron whether in combination with concrete or not, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in — areas which can only be used by pedestrians and pedal cyclists (at least class A 15), — pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125), — the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250), — carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400), — areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600), — areas imposing particularly high wheel loads, e.g. aircraft pavements (class F 900). This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/grating made of cast iron with frames according to EN 124-3, EN 124-4, EN 124-5 or EN 124-6. This European Standard is not applicable to: — cover fillings installed on site, e.g. concrete, paving blocks, etc.; — concave gratings for class D 400 installed in carriageways of roads or hard shoulders and concave gratings for classes F 900 and E 600; — gratings/covers as part of prefabricated drainage channels according to EN 1433; — floor and roof gullies in buildings which are specified in EN 1253 (all parts); and — surface boxes.

ICS

93.080.30 Úttartozékok és berendezések

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2015-11-01

Forrás

idt EN 124-2:2015

Előd

MSZ EN 124:1999

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

305/2011/EU; (CPR11); 89/106/EGK; (CPR89)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 962914) ,

oldalszáma

33 oldal; Q kategória

ára

Nettó: 13160 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 16582 Ft
PDF (letöltés) formátum esetén (27% Áfával): 16713 Ft