Hivatkozási szám

MSZ EN 1459:1998+A3:2012

Dokumentumazonosító

654112

Cím

Targoncák biztonsága. Változtatható kinyúlású gépi hajtású targoncák

Angol cím

Safety of industrial trucks. Self-propelled variable reach trucks

Alkalmazási terület

1.1 This standard applies to self-propelled seated rider operated variable reach trucks intended to handle loads of all kinds using one of the attachments listed in 3.10 - 3.11 - 3.13 - 3.14 - 3.15 - 3.16 - 3.19 - 3.20. It does not cover the lifting of persons by any attachments, in particular by work platforms. Machines with variable length load suspension elements (chains, ropes etc) from which the load may swing freely in all directions are not covered in this standard. It applies to the handling of series 1 freight containers of length > 6 metres with the dimensional and securing characteristics as specified in ISO 668 and ISO 3874. 1.2 For the purpose of this standard, self-propelled seated rider operated variable reach trucks (hereinafter referred to as “trucks”) are counterbalanced lift trucks with one or more articulated arms, telescopic or not, non-slewing, as defined in 4.13.2.2.2 of ISO 5053:1987 used for stacking loads. The load handling means may be mounted directly on the lifting means or on an auxiliary mast fixed at the end of the lifting means. Lifting means shall be non-slewing or have slewing movement not greater than 5° either side of the longitudinal axis of the truck (see figure 1). 1.3 Two types of variable reach trucks are covered in this standard: - industrial trucks for operation on substantially firm smooth, level and prepared surfaces; - rough terrain trucks for operation on unimproved natural terrain and disturbed terrain or areas. 1.4 Trucks may be equipped with fork arms for normal industrial duties, or attachments for specific applications such as handling freight containers. Trucks may be equipped with stabilisers, axle locking or lateral levelling devices. 1.5 This standard covers all specific hazards which could occur during operation and maintenance of trucks. For hazards occurring during construction, transportation, commissioning, decommissioning and disposal, reference should be made to EN 292-2. 1.6 Unless otherwise specified by the manufacturer, the trucks are designed to operate in a temperature range of -20°C to + 50°C. The manufacturer shall specify in his instructions for use the precautions to be taken when using the trucks at extreme temperatures.

ICS

53.060 Ipari targoncák

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2012-08-01

A visszavonás napja

2018-09-30

Forrás

idt EN 1459:1998+A3:2012

Előd

MSZ EN 1459:1998+A2:2010

Utód

MSZ EN 1459-1:2018

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2006/42/EK AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2006/42/EK IRÁNYELVE (2006. május 17.) a gépekről és a 95/16/EK irányelv módosításáról (átdolgozás) (EGT vonatkozású szöveg) (MAC06)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 923500) ,

oldalszáma

77 oldal; W kategória

ára

Nettó: 19470 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 24532 Ft
PDF (letöltés) formátum esetén (27% Áfával): 24727 Ft