Hivatkozási szám

MSZ EN 61058-2-4:2006

Dokumentumazonosító

639435

Cím

Készülékkapcsolók. 2-4. rész: Független szerelésű kapcsolók követelményei (IEC 61058-2-4:1995 + A1:2003)

Angol cím

Switches for appliances. Part 2-4: Particular requirements for independently mounted switches (IEC 61058-2-4:1995 + A1:2003)

Alkalmazási terület

This clause of part 1 is applicable except as follows: 1.1 Replacement: This International Standard applies to independently mounted switches for appliances (mechanical or electronic) actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard, the word “appliance” means “appliance or equipment”. 1.2 This subclause of Part 1 is not applicable 1.3 This subclause of Part 1 is applicable. 1.4 This subclause of Part 1 is not applicable.

ICS

29.120.40 Kapcsolók

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2006-01-01

A visszavonás napja

2024-02-05

Forrás

idt EN 61058-2-4:2005; idt IEC 61058-2-4:1995; idt IEC 61058-2-4:1995/A1:2003

Előd

Utód

MSZ EN IEC 61058-2-4:2021

Módosítás

SZK-közlemények

Kapcsolódó európai jogszabály

2006/95/EK; (LVD06); 2014/35/EU (LVD14)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 348470) ,

oldalszáma

24 oldal; M kategória

ára

Nettó: 11290 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 14225 Ft
PDF (letöltés) formátum esetén (27% Áfával): 14338 Ft