Hivatkozási szám

MSZ ISO 8297:2005

Dokumentumazonosító

636025

Cím

Akusztika. Több zajforrásos ipari üzem hangteljesítményszintjének meghatározása a környezeti hangnyomásszint becslésére. Műszaki módszer

Angol cím

Acoustics. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment. Engineering method

Alkalmazási terület

1.1 General This International Standard specifies an engineering method (grade 2, as defined in IS0 2204) for determining the sound power levels of large multisource industrial plants relevant to the evaluation of sound pressure levels in the environment. These sound power levels may be used in an appropriate prediction model for such an evaluation. The method is limited to large industrial plants with multiple noise sources (a combination of an unspecified number of individual sources) having their main dimensions in the horizontal plane, and which radiate sound substantially uniformly in all horizontal directions. Unweighted sound pressure levels are measured in octave bands. The results obtained are expressed both in octaveband sound power levels and, if required, in Aweighted sound power levels. 1.2 Type and size of noise source The method is applicable to industrial areas where most of the equipment operates outdoors, not en- ’ closed by a building, e.g. petrochemical complexes, factories, stone quarries, crushing plants and pithead installations. The method is also applicable when there are moving sources performing cyclic or continuous operations, such as drag lines or cable conveyors, provided that the measurements can be related to at least one cycle of operation. It is applicable to industrial plants in which the largest horizontal dimension of the plant area lies between 16 m and approximately 320 m. 1.3 Types of noise This International Standard applies to sources which radiate broad-band noise, narrow-band noise, discrete tones, repetitive impulsive noise and combinations of such components. The procedure given is applicable to steady noise and to non-steady noise provided that it is statistically stationary. It is not suitable for measuring isolated bursts of sound energy. The method is best suited for broad-band steady noise. 1.4 Measurement uncertainty The uncertainty inherent in the method due to the layout of the plant depends mainly on the average distance, d, between the measurement contour and the boundary of the plant, in relation to the square root of the plant area, S,, and is given in table 1. Táblázat These uncertainties arise from spatial variations in the sound pressure levels (averaged over time) at the different measurement positions, owing to the inhomogeneous distribution of sound sources within the plant. They do not include uncertainties due to variations in the noise emissions of the sources over a period of time. NOTE 1 In cases where background noise corrections in accordance with 9.5.4 cannot be applied, the uncertainties may be greater than those given in table 1.

ICS

17.140.20 Gépek és berendezések zajkibocsátása

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2005-01-01

Forrás

idt ISO 8297:1994

Előd

Utód

Módosítás

MSZ ISO 8297:1994/Amd 1:2021

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 2178405) ,

oldalszáma

14 oldal; G kategória

ára

Nettó: 8000 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 10080 Ft
PDF (letöltés) formátum esetén (27% Áfával): 10160 Ft