Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 17420 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN ISO 19085-2:2022
Dokumentumazonosító
178358
Cím
Famegmunkáló gépek. Biztonság. 2. rész: Nyomógerendás, vízszintes lapszabász-körfűrészgép (ISO 19085-2:2021)
Angol cím
Woodworking machines. Safety. Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)
Alkalmazási terület
This document gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually and/or powered loaded and manually unloaded, capable of continuous production use, as defined in 3.1 and hereinafter referred to as “machines”. This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — side pressure device; — device for powered unloading; — unit for scoring; — unit for post-formed/soft-formed edge pre-cutting; — panel turning device; — front side turn table; — pushing out device; — pneumatic clamping of the saw blade; — powered panel loading device; — device for grooving by milling tool; — one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line); — workpiece vacuum clamping as part of a front side turn table or of a panel loading device; — panel pusher; — independent panel pushers; — additional panel pushers mounted on the panel pusher carriage; — additional panel pusher with integrated label printer device; — lifting platform; — device for automatic loading of thin panels; — device for base board unloading by gravity; — device for base board powered unloading; — device for panel unloading in limited space condition; — loading or pre-loading roller conveyors; Túl hosszú scope
ICS
13.110 Gépek biztonsága
79.120.10 Famegmunkáló gépek
A szabvány nyelve
angol
Az érvényesség kezdete
2022-04-01
További adatok
Forrás
idt ISO 19085-2:2021; idt EN ISO 19085-2:2021
Utód
Módosítás
SZK-közlemények
Kapcsolódó európai jogszabály
2006/42/EK AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2006/42/EK IRÁNYELVE (2006. május 17.) a gépekről és a 95/16/EK irányelv módosításáról (átdolgozás) (EGT vonatkozású szöveg) (MAC06)
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 1984730) ,
oldalszáma
57 oldal; U kategória
ára
Nettó: 17420 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 21949 Ft
PDF (letöltés) formátum esetén (27% Áfával): 22123 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN ISO 19085-2:2022

2022-04-01

Utódok

Jelenleg nincsenek utódok