Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 13160 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN 16759:2021
Dokumentumazonosító
177900
Cím
Ragasztott üvegezés ajtókhoz, ablakokhoz és függönyfalakhoz. Alumínium- és acélfelületekhez használt ragasztók mechanikai teljesítményének verifikálása
Angol cím
Bonded Glazing for doors, windows and curtain walling. Verification of mechanical performance of bonding on aluminium and steel surfaces
Alkalmazási terület
This document specifies the method to be used to verify the mechanical performance of the bonded glazing for doors, windows and curtain walling (see examples in Annex A) and its durability. The bonding covered is only that between the glass and the untreated, treated or coated metal surface. NOTE 1 Bonded glazing was formerly known as structural sealant glazing SSGS. This document covers bonded glazing incorporated into the product construction works as follows: — either vertically; or — up to 83 ° from the vertical (positive slope); or — up to 15 ° from the vertical onto the building face (negative slope). NOTE 2 A wall has a positive slope if its outer surface faces upwards (see Figure A.1). Specific additional safety provisions may apply nationally. This document gives information to the manufacturer to comply with requirements regarding design, factory production control and assembly rules. The parts concerned in the testing are the metal surface (anodized and coated aluminium, stainless steel), the surface of glass, provided or not, with a layer or coating, which shall be bonded, the bonding sealant and mechanical restraints when required. This document does not apply to: — other surfaces materials; — direct glazing; — glass-to-glass bonding and edge seal of insulating glass units (which are covered by EN 13022-1 and EN 1279-5); — adhesive tapes.
ICS
81.040.20 Épületüvegek
Műszaki Bizottság
A szabvány nyelve
angol
Az érvényesség kezdete
2021-12-01
További adatok
Forrás
idt EN 16759:2021
Előd
Utód
Módosítás
SZK-közlemények
Kapcsolódó európai jogszabály
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 5437454) ,
oldalszáma
33 oldal; Q kategória
ára
Nettó: 13160 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 16582 Ft
PDF (letöltés) formátum esetén (27% Áfával): 16713 Ft
Szabvány életútja
Elődök

Jelenleg nincsenek előzmények

Megtekintett szabvány

MSZ EN 16759:2021

2021-12-01

Utódok

Jelenleg nincsenek utódok