Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 22390 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN 16486:2014+A1:2020
Dokumentumazonosító
176090
Cím
Gépek hulladékok vagy újrahasznosítható anyagok tömörítéséhez. Tömörítők. Biztonsági követelmények
Angol cím
Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements
Alkalmazási terület
This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This European Standard applies to: — compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and — compactors that are mechanically fed and/or fed by hand. These compactors can be: — static compactors; — transportable compactors; — traversing systems. The scope includes: — any integral mechanical feed equipment (e.g. bin lift); — feed hoppers/openings; — any integral pre-conditioning equipment in the hopper (e.g. perforators, pre-crushing devices and shredders); — any integral material flow control equipment; — the interface between the compactor and any feed equipment (except those excluded from the scope). The scope of this European Standard does not cover: — compactors that are covered by EN 1501 (all parts); — underground compactors, however if these compactors can be used above ground this standard applies; — compactors using thermal technologies for compaction; — vacuum compactors; — compactors where materials are compacted vertically; — containers for static compactors, however the interface between the compaction unit and the container is included; — bins in which materials are collected for feeding into the compactor; — any up-stream pre-treatment equipment that is not integral to the machine and is used to treat the materials before they are fed into the feed opening of the compactor; — vehicles including lifting equipment used to collect and transport the compactor or container; — cranes, lift trucks or other transportable plant used to load materials into the feed hopper/opening and the hazards arising out of using this equipment to load; — any suction or dust control equipment. This European standard does not cover the lifting and transport of transportable compactors. This European Standard does not apply to hazards arising from the materials being processed (e.g. asbestos, clinical waste, aerosol containers). All hazards mentioned in Clause 4 are dealt with in this European Standard. This European Standard is not applicable for compactors which are manufactured before the date of its publication as an EN.
ICS
43.160 Különleges rendeltetésű járművek
A szabvány nyelve
angol
Az érvényesség kezdete
2020-12-01
További adatok
Forrás
idt EN 16486:2014+A1:2020
Utód
Módosítás
Kiegészítő információk
SZK-közlemények
Kapcsolódó európai jogszabály
2006/42/EK AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2006/42/EK IRÁNYELVE (2006. május 17.) a gépekről és a 95/16/EK irányelv módosításáról (átdolgozás) (EGT vonatkozású szöveg) (MAC06)
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 1123505) ,
oldalszáma
51 oldal; W kategória
ára
Nettó: 22390 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 28211 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 28435 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN 16486:2014+A1:2020

2020-12-01

Utódok

Jelenleg nincsenek utódok