Hivatkozási szám

MSZ EN ISO 12215-5:2019 1.

Dokumentumazonosító

170873

Cím

Kishajók. Hajótest-kialakítás és -méretezés. 5. rész: Az egytörzsű hajók tervezett nyomásai, tervezett feszültségei, a méretek meghatározása (ISO 12215-5:2008, tartalmazza az Amd 1:2014 módosítást)

Angol cím

Small craft. Hull construction and scantlings. Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008, including Amd 1:2014)

Alkalmazási terület

This part of ISO 12215 applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre-reinforced plastics, aluminium or steel alloys, glued wood or other suitable boat building material, with a length of hull, LH, in accordance with ISO 8666, between 2,5 m and 24 m. It only applies to boats in the intact condition. It only applies to craft with a maximum speed u 50 knots in mLDC conditions. The assessment shall generally include all parts of the craft that are assumed watertight or weathertight when assessing stability, freeboard and buoyancy in accordance with ISO 12217 and are essential to the safety of the craft and of persons on board. For the complete scantlings of the craft, this part of ISO 12215 is used in conjunction with Part 6, for details, Part 7 for multihulls, Part 8 for rudders and Part 9 for appendages and rig attachment. The scantling determination of windows, portlights, deadlights, hatches and doors, is in accordance with ISO 12216. The structure supporting these elements is in accordance with this part of ISO 12215. NOTE 1 Scantlings derived from this part of ISO 12215 are primarily intended to apply to recreational craft including recreational charter vessels and may not be suitable for performance racing craft. NOTE 2 This part of ISO 12215 is based on the assumption that scantlings are governed solely by local loads. NOTE 3 The scantling requirements of this part of ISO 12215 are considered to correspond to the minimum strength requirements of motor and sailing craft which are operated in a safe and responsible manner, having due cognisance of the prevailing conditions. Pressures and stresses are normally expressed in pascals, kilopascals or megapascals. For the purposes of a better understanding for the users of this part of ISO 12215, the pressures are expressed in kilonewtons per square metre (1kN/m2 = 1kPa) and stresses or elastic moduli are expressed in newtons per square millimetre (1 N/mm2 = 1 Mpa).

ICS

47.080 Kis méretű vízi járművek

A szabvány nyelve

angol

Az érvényesség kezdete

2019-02-01

A visszavonás napja

2021-06-30

Forrás

idt EN ISO 12215-5:2018; idt ISO 12215-5:2008; idt ISO 12215-5:2008/Amd 1:2014

Előd

MSZ EN ISO 12215-5:2008, MSZ EN ISO 12215-5:2008/A1:2014

Utód

MSZ EN ISO 12215-5:2019 2.

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

(RCD01); 2013/53/EU (RECR13); 94/25/EK; (RECR94)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1330070) ,

oldalszáma

123 oldal; XB kategória

ára

Nettó: 25750 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 32445 Ft
PDF (letöltés) formátum esetén (27% Áfával): 32703 Ft