Hivatkozási szám

MSZ EN ISO 16090-1:2018

Dokumentumazonosító

168661

Cím

Szerszámgépek biztonsága. Megmunkálóközpontok, marógépek, aggregátgépek. 1. rész: Biztonsági követelmények (ISO 16090-1:2017)

Angol cím

Machine tools safety. Machining centres, Milling machines, Transfer machines. Part 1: Safety requirements (ISO 16090-1:2017)

Alkalmazási terület

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2), machining centres and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical characteristics similar to those of wood as defined in ISO 19085-1, and for glass, stone and engineered/agglomerated materials as defined in EN 14618. This document covers the following machines: a)manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1),e.g. knee and column type milling machines (see Figures C.1 and C.2); b)manually, with limited numerical control, operated boring and milling machines (see 3.2.2,Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4); c)numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automaticmilling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines(see Figures C.5, C.6 and C.7); d)transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequenceof machining operations and process parameters (see Figures C.8, C.9, C.10, C.11, C.12 and C.13). This document also applies to machines fitted with the following devices/facilities: — tool magazine(s); — tool changer(s); — workpiece handling mechanism(s); — powered workpiece clamping mechanism(s); — swarf/chip conveyor(s); — power-operated door(s); — additional equipment for turning; — additional equipment for grinding. When in this document the sole word “machine” or “machines” is being used, it is referred to all above-mentioned groups and types of machines. This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which may occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

ICS

25.080.01 Szerszámgépek általában

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2018-09-01

A visszavonás napja

2023-05-01

Forrás

idt EN ISO 16090-1:2018; idt ISO 16090-1:2017

Előd

MSZ EN 12417:2001+A2:2009, MSZ EN 13128:2001+A2:2009, MSZ EN 14070:2003+A1:2009

Utód

MSZ EN ISO 16090-1:2023

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2006/42/EK AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2006/42/EK IRÁNYELVE (2006. május 17.) a gépekről és a 95/16/EK irányelv módosításáról (átdolgozás) (EGT vonatkozású szöveg) (MAC06)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 4880201) ,

oldalszáma

162 oldal; XC kategória

ára

Nettó: 28640 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 36086 Ft
PDF (letöltés) formátum esetén (27% Áfával): 36373 Ft