Hivatkozási szám

MSZ EN 62722-2-1:2016

Dokumentumazonosító

164085

Cím

A lámpatest működési jellemzői. 2-1. rész: LED-lámpatestek kiegészítő követelményei (IEC 62722-2-1:2014, módosítva)

Angol cím

Luminaire performance. Part 2-1: Particular requirements for LED luminaires (IEC 62722-2-1:2014, modified)

Alkalmazási terület

This part of IEC 62722 specifies the performance requirements for LED luminaires, together with the test methods and conditions, required to show compliance with this standard. It applies to LED luminaires for general lighting purposes. The following types of LED luminaires are distinguished. – Type A – Luminaires using LED modules where compliance with IEC 627171 has been proven. – Type B – Luminaires using LED modules where compliance with IEC 627171 has not been proven. – Type C – Luminaires using a LED lamp and covered in IEC 62722-1. The requirements of this standard only relate to type testing. This standard does not cover Type C luminaires. This standard does not cover LED luminaires that intentionally produce coloured light, neither does it cover luminaires using OLEDs (organic LEDs). These performance requirements are additional to the requirements in IEC 62722-1, Clauses 1 to 9, except where in this Part 2-1 alternative methods of measurement or limits are specified. As this standard has been simultaneously developed and edited with the standard for LED modules, where appropriate the compliance of the LED modules to the provisions of IEC 62717 may be transferred to the whole luminaire. Life time of LED luminaires is in most cases much longer than the practical test times. Consequently, verification of manufacturer’s life time claims cannot be made in a sufficiently confident way. For that reason the acceptance or rejection of a manufacturer’s life time claim, past 25 % of rated life (with a maximum of 6 000 h), is out of the scope of this standard. Instead of life time validation, this standard has opted for lumen maintenance categories at a defined finite test time. Therefore, the category number does not imply a prediction of achievable life time. The categories are lumen-depreciation character categories showing behaviour in agreement with manufacturer’s information which is provided before the test is started. In order to validate a life time claim, an extrapolation of test data is needed. A general method of projecting measurement data beyond limited test time is under consideration. For explanation of recommended life time metrics see IEC 62717, Annex C. It may be expected that LED luminaires which comply with this standard will start and operate satisfactorily at voltages between 92 % and 106 % of rated supply voltage and at an ambient air temperature within the declared range of the manufacturer. Evaluation of LOR (light output ratio) for LED luminaire is under consideration.

ICS

29.140.40 Lámpatestek

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2016-11-01

A visszavonás napja

2026-02-28

Forrás

idt EN 62722-2-1:2016; idt IEC 62722-2-1:2014

Előd

Utód

MSZ EN IEC 62722-2-1:2023

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 605079) ,

oldalszáma

24 oldal; M kategória

ára

Nettó: 11290 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 14225 Ft
PDF (letöltés) formátum esetén (27% Áfával): 14338 Ft