Hivatkozási szám

MSZ EN ISO 17892-2:2015

Dokumentumazonosító

160364

Cím

Geotechnikai vizsgálatok. Talajok laboratóriumi vizsgálata. 2. rész: A térfogatsűrűség meghatározása (ISO 17892-2:2014)

Angol cím

Geotechnical investigation and testing. Laboratory testing of soil. Part 2: Determination of bulk density (ISO 17892-2:2014)

Alkalmazási terület

This International Standard specifies three methods for the determination of the bulk density of soils, comprising: a) linear measurement method; b) immersion in fluid method; c) fluid displacement method. This International Standard is applicable to the laboratory determination of the bulk density of soil within the scope of geotechnical investigations. The linear measurement method is suitable for the determination of the bulk density of a specimen of soil of regular shape, including specimens prepared for other tests. The specimens used are either rectangular prisms or cylinders with circular cross sections. The immersion in fluid method covers the determination of the bulk density of a specimen of natural or compacted soil by measuring its mass in air and its apparent mass when suspended in fluid. The method may be used when lumps of material of suitable size can be obtained. The fluid displacement method covers the determination of the bulk density of a specimen of soil by measuring its mass in air and the mass of fluid displaced by immersion. The method may be used when lumps of material of suitable size can be obtained. If the immersion in fluid method or fluid displacement method is used, and if the fluid is likely to penetrate into the specimen (eg water) the specimen should be coated before testing to prevent fluid penetration. The bulk density of a soil is useful in the determination of the in situ overburden stress as a function of depth. If required, the dry density of a specimen may be calculated from the bulk density and the water content, if known. NOTE This International Standard fulfils the requirements of the determination of the bulk density of soils for geotechnical investigation and testing in accordance with EN 1997–1 and EN 1997–2.

ICS

13.080.20 Talaj fizikai tulajdonságai

93.020 Földmunkák. Földkiemelés. Alapozásépítés. Föld alatti munkák

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2015-06-01

Forrás

idt ISO 17892-2:2014; idt EN ISO 17892-2:2014

Előd

MSZE CEN ISO/TS 17892-2:2006

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 514150) ,

oldalszáma

19 oldal; K kategória

ára

Nettó: 9880 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 12449 Ft
PDF (letöltés) formátum esetén (27% Áfával): 12548 Ft