Hivatkozási szám

MSZ EN 62798:2015

Dokumentumazonosító

159753

Cím

Villamos fűtésű ipari berendezések. Infravörös sugárzók vizsgálati módszerei (IEC 62798:2014)

Angol cím

Industrial electroheating equipment. Test methods for infrared emitters (IEC 62798:2014)

Alkalmazási terület

This International Standard specifies test procedures, conditions and methods according to which the main parameters and the main operational characteristics of industrial infrared emitters are established. A limitation of the scope of this standard is that the infrared emitters have a maximum spectral emission at longer wavelengths than 780 nm in air or vacuum, and are emitting wideband continuous spectra such as by thermal radiation or high pressure arcs. IEC 60519-1:2010 [1] 1 defines infrared as optical radiation within the frequency range between about 400 THz and 300 GHz. This corresponds to the wavelength range between 780 nm and 1 mm in vacuum. Industrial infrared heating usually uses infrared sources with rated temperatures between 500 °C and 3 000 °C; the emitted radiation from these sources dominates in the wavelength range between 780 nm and 10 µm. Industrial infrared emitters under the scope of this standard typically use the Joule effect for the conversion of electric energy in one or several sources into infrared radiation, which is emitted from one or several elements. Such infrared emitters are especially – thermal infrared emitters in the form of tubular, plate-like or otherwise shaped ceramics with a resistive element inside; – infrared quartz glass tube or halogen lamp emitters with a hot filament as a source; – non-insulated elements made from molybdenum-disilicide, silicon-carbide, iron-chromiumaluminium alloys or comparable materials; – wide-spectrum arc lamps. This standard is not applicable to – infrared emitters which are lasers or light-emitting diodes (LEDs); – infrared emitters for use by the general public; – infrared emitters for laboratory use. Most of the tests described, especially the destructive tests, are for type testing. The tests specified in this standard are intended to be used for evaluating or comparing the performance of emitters belonging to the same category. Tests related to performance of industrial infrared electroheating installations are specified in IEC 62693:2013. Most tests specified in this standard are applicable to wide-spectrum arc lamps, but not all.

ICS

25.180.10 Villamos kemencék

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2015-04-01

Forrás

idt IEC 62798:2014; idt EN 62798:2014; idt EN 62798:2014/AC:2014

Előd

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

2016/06: Helyesbítés

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 764025) ,

oldalszáma

49 oldal; T kategória

ára

Nettó: 15850 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 19971 Ft
PDF (letöltés) formátum esetén (27% Áfával): 20130 Ft