Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 8000 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN 14540:2014
Dokumentumazonosító
159110
Cím
Tűzoltó tömlők. Szivárgásmentes lapostömlők beépített rendszerekhez
Angol cím
Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
Alkalmazási terület
This European Standard specifies the requirements and test methods for non-percolating layflat hoses for fixed systems. The hoses are intended for use at a maximum working pressure of 1,5 MPa over a range of inside diameters from 25 mm to 52 mm. This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at a minimum ambient temperature of -20 °C in normal conditions, and a minimum temperature of -30 °C in colder climatic conditions and a maximum ambient temperature of +60 °C. Hoses conforming to this standard should be used with fire hose couplings conforming to the relevant national standards for couplings. NOTE 1 Hoses for use at ambient temperatures below -20 °C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f). Hoses in marine applications and/or aggressive environments to be used with wall hydrants as specified in EN 671-2 can conform to the requirements of this standard. NOTE 2 All pressures are gauge pressures and are expressed in megapascals1.
ICS
13.220.10 Tűzoltás
23.040.70 Tömlők és tömlőszerelvények
A szabvány nyelve
angol
Az érvényesség kezdete
2014-11-01
További adatok
Forrás
idt EN 14540:2014
Utód
Módosítás
SZK-közlemények
Kapcsolódó európai jogszabály
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 408752) ,
oldalszáma
13 oldal; G kategória
ára
Nettó: 8000 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 10080 Ft
PDF (letöltés) formátum esetén (27% Áfával): 10160 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN 14540:2014

2014-11-01

Utódok

Jelenleg nincsenek utódok