Hivatkozási szám

MSZ EN 60404-15:2013

Dokumentumazonosító

155915

Cím

Mágneses anyagok. 15. rész: Gyengén mágneses anyagok relatív mágneses permeabilitásának meghatározási módszere (IEC 60404-15:2012)

Angol cím

Magnetic materials. Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (IEC 60404-15:2012)

Alkalmazási terület

This part of IEC 60404 specifies a solenoid method, a magnetic moment method, a magnetic balance method and a permeability meter method for the determination of the relative magnetic permeability of feebly magnetic materials (including austenitic stainless steel). The magnetic balance and permeability meter methods are both comparison methods calibrated using reference materials to determine the value of the relative magnetic permeability of the test specimen. The relative magnetic permeability range for each of these methods is shown in Table 1. The methods given are for applied magnetic field strengths of between 5 kA/m and 100 kA/m. NOTE 1 The relative magnetic permeability range given for the magnetic balance method covers the inserts provided with a typical instrument. These can only be assessed at values for which calibrated reference materials exist. NOTE 2 For a relative magnetic permeability larger than 2, a reference material cannot be calibrated using this written standard. A note of this is given in the test report explaining that the values measured using the magnetic balance are for indication only. The solenoid method is the reference method. The magnetic moment method described is used mainly for the measurement of the relative magnetic permeability of mass standards. Two comparator methods used by industry are described. These can be calibrated using reference materials for which the relative magnetic permeability has been determined using the reference method. When suitable, the magnetic moment method can also be used. The dimensions of the reference material need to be given careful consideration when determining the uncertainty in the calibration value due to self-demagnetization effects. See Annex A for more information on correcting for self-demagnetization.

ICS

17.220.01 Villamosság. Mágnesség. Általános szempontok

29.030 Mágneses anyagok

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2013-07-01

Forrás

idt IEC 60404-15:2012; idt EN 60404-15:2012

Előd

Utód

Módosítás

MSZ EN 60404-15:2012/A1:2017

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 388345) ,

oldalszáma

21 oldal; L kategória

ára

Nettó: 10600 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 13356 Ft
PDF (letöltés) formátum esetén (27% Áfával): 13462 Ft