Hivatkozási szám

MSZ EN 62006:2011

Dokumentumazonosító

151749

Cím

Hidraulikus gépek. Törpe vízierőművek átvételi vizsgálatai (IEC 62006:2010)

Angol cím

Hydraulic machines. Acceptance tests of small hydroelectric installations (IEC 62006:2010)

Alkalmazási terület

This International Standard defines the test, the measuring methods and the contractual guarantee conditions for field acceptance tests of the generating machinery in small hydroelectric power installations. It applies to installations containing impulse or reaction turbines with unit power up to about 15 MW and reference diameter of about 3 m. The driven generator can be of synchronous or asynchronous type. This International Standard contains information about most of the tests required for acceptance of the hydraulic turbine such as safety approval tests, trial operating and reliability tests, as well for verification of cavitation, noise and vibration conditions, if required. This standard represents the typical methods used on smaller hydroelectric installations, and is divided into three classes as follows (see Table 1 for more detail): Class A Normal test program (panel measurement) To determine the maximum power output of the installation. Default Class B Extended test program To determine the performance characteristics of the installation. Recommended Class C Comprehensive test program To determine the absolute efficiency of the installation. Optional NOTE All classes contain safety tests, trial operating tests, and reliability tests. This standard gives all necessary references for the contract in order to execute the test, evaluate, calculate and compare the result to the guarantee for all the classes A, B and C. The manufacturer or consulting engineer is responsible for ensuring that standardized connections are installed for performing these tests. This standard does not cover the structural details of a hydroelectric installation or its component parts.

ICS

27.140 Vízenergia

A szabvány nyelve

angol

Az érvényesség kezdete

2011-07-01

Forrás

idt IEC 62006:2010; idt EN 62006:2011

Előd

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 2253918) ,

oldalszáma

111 oldal; XA kategória

ára

Nettó: 26890 Ft
Bruttó:
Papír formátum esetén (20% nyomdai költséggel, 5% Áfával): 33881 Ft
PDF (letöltés) formátum esetén ( 27% Áfával): 34150 Ft