Hivatkozási szám

MSZ EN 13121-3:2008+A1:2010

Dokumentumazonosító

150636

Cím

Föld feletti GRP-tartályok és -edények. 3. rész: Tervezés és gyártás

Angol cím

GRP tanks and vessels for use above ground. Part 3: Design and workmanship

Alkalmazási terület

This European Standard gives requirements for the design, fabrication, inspection, testing and verification of GRP tanks and vessels with or without Thermoplastics lining for storage or processing of fluids, factory made or site built, non pressurised or pressurised up to 10 bar, for use above ground. The terms vessels and tanks as used in this European Standard include branches up to the point of connection to pipe work or other equipment by bolting and supports, brackets or other attachments bonded directly to the shell. In addition to the definitive requirements, this European Standard also requires the items in Clause 5 to be fully documented. This European Standard covers vessels and tanks subject to temperatures between - 40 °C and + 120 °C. NOTE It is possible that future advances in resin technology would allow tanks and vessels to be considered for operating temperatures above + 120 °C. Should such a situation arise and a manufacturer wishes to take advantage of such developments, then all other requirements of the standard shall be maintained and such tanks and vessels shall only be designed in accordance with the advanced design method given in 7.8.3. Excluded from this European Standard are: Tanks and vessels for the transport of fluids; Underground storage tanks; Spherical vessels; Vessels and tanks of irregular shape; Tanks and vessels with double containment; Tanks and vessels which are subject to the risk of explosion, or failure of which may cause an emission of radioactivity; Specification for fibre reinforced cisterns of one piece and sectional construction for the storage, above ground, of cold water (see EN 13280:2001).

ICS

23.020.10 Helyhez kötött konténerek és tartályok

Műszaki Bizottság

A szabvány nyelve

magyar

Az érvényesség kezdete

2010-11-01

A visszavonás napja

2016-10-01

Forrás

idt EN 13121-3:2008+A1:2010/AC:2010; idt EN 13121-3:2008+A1:2010

Előd

MSZ EN 13121-3:2008

Utód

MSZ EN 13121-3:2016

Módosítás

Kiegészítő információk

SZK-közlemények

2014/09: Helyesbítés

Kapcsolódó európai jogszabály

97/23/EK; (PRE97)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 3453317) ,

oldalszáma

224 oldal; XE kategória

ára

Nettó: 38170 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 48094 Ft
PDF (letöltés) formátum esetén (27% Áfával): 48476 Ft