Hivatkozási szám

MSZ EN 267:2010

Dokumentumazonosító

149288

Cím

Automata blokkégők folyékony tüzelőanyagokhoz

Angol cím

Automatic forced draught burners for liquid fuels

Alkalmazási terület

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners. This European Standard applies to automatic forced draught oil burners supplied with: ? a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 °C; and ? higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation. This European Standard is applicable to: ? single burners fitted to a single combustion chamber; ? single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account; ? single-fuel and dual-fuel burners when operating on oil only; ? the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function. This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J. This European Standard also deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K. This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance. This European Standard does not deal with hazards due to specific applications. This European Standard is not applicable to automatic forced draught oil burners which are manufactured before the date of its publication as European Standard.

ICS

27.060.10 Égők folyékony és szilárd tüzelőanyagokhoz

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2010-04-01

A visszavonás napja

2011-12-01

Forrás

idt EN 267:2009

Előd

MSZ EN 267:2001

Utód

MSZ EN 267:2009+A1:2011

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2006/42/EK AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2006/42/EK IRÁNYELVE (2006. május 17.) a gépekről és a 95/16/EK irányelv módosításáról (átdolgozás) (EGT vonatkozású szöveg) (MAC06); 97/23/EK; (PRE97)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 917981) ,

oldalszáma

90 oldal; X kategória

ára

Nettó: 21330 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 26876 Ft
PDF (letöltés) formátum esetén (27% Áfával): 27089 Ft