Hivatkozási szám

MSZ EN 60068-2-27:2009

Dokumentumazonosító

148307

Cím

Környezetállósági vizsgálatok. 2. rész: Vizsgálatok. Ea vizsgálat és irányelv: Ütés (IEC 60068-2-27:2008)

Angol cím

Environmental testing. Part 2-27: Tests. Test Ea and guidance: Shock (IEC 60068-2-27:2008)

Alkalmazási terület

This part of IEC 60068 provides a standard procedure for determining the ability of a specimen to withstand specified severities of non-repetitive or repetitive shocks. The purpose of this test is to reveal mechanical weakness and/or degradation in specified performances, or accumulated damage or degradation caused by shocks. In conjunction with the relevant specification, this may be used in some cases to determine the structural integrity of specimens or as a means of quality control (see Clause A.2). This test is primarily intended for unpackaged specimens and for items in their transport case when the latter may be considered to be part of the specimen. If an item is to be tested unpackaged, it is referred to as a test specimen. However, if the item is packaged, then the item itself is referred to as a product and the item and its packaging together are referred to as a test specimen. When used in conjunction with IEC 60068-2-47, this standard may be used for testing packaged products. This possibility was included in the 2005 version of IEC 60068-2-47 for the first time. This standard is written in terms of prescribed pulse shapes. Guidance for the selection and application of these pulses is given in Annex A and the characteristics of the different pulse shapes are discussed in Annex B. Wherever possible, the test severity and the shape of the shock pulse applied to the specimen should be such as to reproduce the effects of the actual transport or operational environment to which the specimen will be subjected, or to satisfy the design requirements if the object of the test is to assess structural integrity (see Clauses A.2 and A.4). For the purposes of this test, the specimen is always mounted to the fixture or the table of the shock testing machine during testing. NOTE The term “shock testing machine” is used throughout this standard, but other means of applying pulse shapes are not excluded. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

ICS

19.040 Környezetállósági vizsgálatok

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2009-10-01

Forrás

idt EN 60068-2-27:2009; idt IEC 60068-2-27:2008

Előd

MSZ EN 60068-2-27:2000, MSZ EN 60068-2-29:2000

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 501206) ,

oldalszáma

38 oldal; R kategória

ára

Nettó: 14180 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 17867 Ft
PDF (letöltés) formátum esetén (27% Áfával): 18009 Ft