Hivatkozási szám

MSZ EN 13598-2:2009

Dokumentumazonosító

147770

Cím

Műanyag csővezetékrendszerek nyomás nélküli, föld alatti alagcsövezéshez és csatornázáshoz. Kemény poli(vinil-klorid) (PVC-U), polipropilén (PP) és polietilén (PE) 2. rész: Közlekedési területek és mély, föld alatti beépítések tisztító- és ellenőrző aknáinak műszaki követelményei

Angol cím

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 2: Specifications for manholes and inspection chambers in traffic areas and deep underground installations

Alkalmazási terület

This European Standard specifies the definitions and requirements for buried manholes and inspection chambers installed to a maximum depth of 6 m from ground level to the invert of the main chamber and manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE). These products are intended for use in pedestrian or vehicular traffic areas and underground installations conforming to the general requirements given in EN 476 and are used outside the building structure (application area code “U”). They are therefore marked accordingly with a “U”. Such products are also deemed to meet the requirements of EN 13598-1 for application area U without the need for further testing. If additionally marked application area D then these products must additionally be tested to show compliance to the elevated temperature cycling requirement of Clause 10 of EN 13598-1. This European Standard is only applicable to those chamber / manhole items where the manufacturer has clearly stated in the documentation how the components shall be assembled to create a complete manhole or inspection chamber. The inspection chambers covered by this European Standard comprise the following: ? inspection chambers providing access to the drainage or sewerage system by means of inspection and cleaning equipment. ? chambers, designated as manholes providing man access to the drainage or sewerage system. The inspection chamber / manhole can be manufactured by various methods e.g. injection moulding, rotational moulding, low-pressure moulding or fabricated from components made in accordance with other standards. The jointing of components can be achieved using: ? elastomeric ring seal joints; ? adhesive joints for PVC-U; ? welded joints for PVC-U, PP and PE; ? extrusion welding; ? mechanical jointing. NOTE Both manholes and inspection chambers can be site assembled from different components, but can also b

ICS

23.040.05 Csővezetékek és külső csatornaelemeik rendszere

23.040.20 Műanyag csövek

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2009-07-01

A visszavonás napja

2017-01-01

Forrás

idt EN 13598-2:2009/AC:2009; idt EN 13598-2:2009

Előd

Utód

MSZ EN 13598-2:2017

Módosítás

SZK-közlemények

2010/01: Helyesbítés

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 431171) ,

oldalszáma

25 oldal; M kategória

ára

Nettó: 11290 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 14225 Ft
PDF (letöltés) formátum esetén (27% Áfával): 14338 Ft