Hivatkozási szám

MSZ EN 791:1995+A1:2009

Dokumentumazonosító

147605

Cím

Fúróberendezések. Biztonság

Angol cím

Drill rigs. Safety

Alkalmazási terület

1.1 The general term "Drill Rig" covers several differing types of machines for use in the construction industry, water well drilling industry, mining and quarrying, for use above ground as well as underground and for tunnel construction. The differing tasks determine the choice of drilling method and type of machine. For this reason there are many possible ways to separate drill rigs into different groups, e.g. in accordance with: - The task; - The drilling method used; - The cutting removal method; - The type of construction work. The methods used for drilling can be basically differentiated in percussive and rotary drilling principles. Percussive drilling is a method by which the hole is produced by crushing the ground or rock at the bottom of the drill-hole by striking it with the drilling tool and removing the cuttings out of the bore-hole. Rotary drilling is a method in which the drilling tool at the bottom of the borehole is rotated and at the same time, a feed force is applied by a feed system or drill collar. The ground or rock at the bottom of the borehole is crushed or cut by pressure, shear or tensile stress produced by the different drilling tools. The cuttings are periodically or continuously removed out of the bore hole. Rotary percussive drilling is performed by a piston striking directly on the bit (down the hole hammer drills) or by percussive energy transmitted via a drill string to the bit. The piston is powered by either hydraulic fluid or compressed air. At the same time the drill bit is rotated either continuously or intermittently. The cuttings are continuously removed out of the borehole by a flushing medium, air or fluid which is carried to the drilling tool. Typical examples of drill rigs covered by this standard are: - Cable tool drill rig; - Pile drill rigs; - Pile top drill rig; - Raise borer; - Reverse circulation drill rig; - Rotary and percussive drill rig for underground drilling; - Rotary and percussive drill rig

ICS

91.220 Építési állványok, gépek

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2009-06-01

A visszavonás napja

2014-09-01

Forrás

idt EN 791:1995+A1:2009

Előd

MSZ EN 791:1999

Utód

MSZ EN 16228-1:2014, MSZ EN 16228-2:2014, MSZ EN 16228-3:2014, MSZ EN 16228-4:2014, MSZ EN 16228-5:2014, MSZ EN 16228-6:2014, MSZ EN 16228-7:2014

Módosítás

SZK-közlemények

Kapcsolódó európai jogszabály

2006/42/EK AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2006/42/EK IRÁNYELVE (2006. május 17.) a gépekről és a 95/16/EK irányelv módosításáról (átdolgozás) (EGT vonatkozású szöveg) (MAC06)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 691745) ,

oldalszáma

71 oldal; W kategória

ára

Nettó: 19470 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 24532 Ft
PDF (letöltés) formátum esetén (27% Áfával): 24727 Ft