Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 8640 Ft
Kosárba tesz
Alapadatok
Hivatkozási szám
MSZ EN 13648-1:2009
Dokumentumazonosító
147148
Cím
Kriogén tartályok. A megengedettnél nagyobb nyomás ellen védő eszközök. 1. rész: Kriogén üzem biztonsági szelepei
Angol cím
Cryogenic vessels. Safety devices for protection against excessive pressure. Part 1: Safety valves for cryogenic service
Alkalmazási terület
This European Standard specifies the requirements for the design, manufacture and testing of safety valves for cryogenic service, that is to say for operation with cryogenic fluids (as defined in EN 1251-1) below – 10 °C in addition to operation at ambient temperature. It is a requirement of this European Standard that the valves comply with EN ISO 4126 1 or EN ISO 4126-4. In the event of different requirements, the requirements for cryogenic service shall be applied. NOTE 1 A cryogenic fluid (refrigerated liquefied gas) is a gas which is partially liquid because of its low temperature (including totally evaporated liquids and supercritical fluids). This European Standard is restricted to valves not exceeding a size of DN 100 for category B. The valves of category A are limited to DN 25 and set pressures up to 40 bars. Both categories are designed to relieve single phase vapours or gases. A valve can be specified, constructed and tested such that it is suitable for use with more than one gas or with mixtures of gases. NOTE 2 All safety valves covered in this European Standard correspond to category IV of PED (Directive 97/23/EC) and category 3 of TPED (Directive 99/36/EC). NOTE 3 This European Standard does not provide methods for determining the capacity of relief valve(s) for a particular cryogenic vessel. Such methods are provided in EN 13648 3.
ICS
23.020.40 Kriogén tartályok
23.060.40 Nyomásszabályozók
A szabvány nyelve
angol
Az érvényesség kezdete
2009-04-01
További adatok
Forrás
idt EN 13648-1:2008
Utód
Módosítás
SZK-közlemények
Kapcsolódó európai jogszabály
2014/68/EU (PRE14); 97/23/EK; (PRE97)
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 336633) ,
oldalszáma
15 oldal; H kategória
ára
Nettó: 8640 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 10886 Ft
PDF (letöltés) formátum esetén (27% Áfával): 10973 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN 13648-1:2009

2009-04-01

Utódok

Jelenleg nincsenek utódok