Hivatkozási szám

MSZ EN 60738-1-3:2008

Dokumentumazonosító

146455

Cím

Termisztorok. Közvetlen fűtésű, pozitív átbillenési hőmérséklet-együtthatójú termisztorok. 1-3. rész: Termékelőírás-űrlap. Alkalmazás kapcsolóelemként. EZ értékelési szint (IEC 60738-1-3:2008)

Angol cím

Thermistors. Directly heated positive step-function temperature coefficient. Part 1-3: Blank detail specification. Inrush current application. Assessment level EZ (IEC 60738-1-3:2008)

Alkalmazási terület

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state: a) whether the thermistor is insulated or non-insulated; b) the material; c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages; d) methods of disposal of the packaging material. 1.8 Electrical data/Ratings and characteristics The detail specification shall give units and tolerances or limiting values for the following parameters. If necessary, electrical data may be listed in tabular form, with reference to styles and codes. Upper/Lower category temperatures (UCT/LCT); Operating temperature range at maximum voltage; Maximum voltage (Uˇmax^.); Zero-power resistance (RˇT^) of series PTC; Zero-power resistance (RˇT^) of parallel PTC; Isolation voltage (insulated thermistors only); Insulation resistance (insulated thermistors only); Minimum series impedance (coil); Minimum peak-to-peak inrush current (Iˇin pp max^.); Maximum peak-to-peak inrush current (Iˇin pp min^.); Residual current at Uˇmax^. (Iˇres^).

ICS

31.040.30 Termisztorok

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2008-11-01

Forrás

idt EN 60738-1-3:2008; idt IEC 60738-1-3:2008

Előd

MSZ EN 60738-1-3:2000

Utód

Módosítás

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 356151) ,

oldalszáma

14 oldal; G kategória

ára

Nettó: 8000 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 10080 Ft
PDF (letöltés) formátum esetén (27% Áfával): 10160 Ft