Hivatkozási szám

MSZ EN 60825-1:2008

Dokumentumazonosító

145124

Cím

Lézergyártmányok sugárbiztonsági előírásai. 1. rész: Készülékosztályozás és követelmények (IEC 60825-1:2007)

Angol cím

Safety of laser products. Part 1: Equipment classification and requirements (IEC 60825-1:2007)

Alkalmazási terület

IEC 60825-1 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical system. Typically, laser products are used for demonstration of physical and optical phenomena, materials processing, data reading and storage, transmission and display of information, etc. Such systems have found use in industry, business, entertainment, research, education, medicine and consumer products. Laser products that are sold to other manufacturers for use as components of any system for subsequent sale are not subject to IEC 60825-1, since the final product will itself be subject to this standard. However, if the laser system within the laser product is operable when removed from the equipment, the requirements of this Part 1 apply to the removable unit. NOTE 1 Operable equipment does not require a tool to prepare for operation. Any laser product is exempt from all further requirements of this Part 1 if classification by the manufacturer of that product according to Clauses 3, 8 and 9 shows that the emission level does not exceed the AEL (accessible emission limit) of Class 1 under all conditions of operation, maintenance, service and failure. NOTE 2 The above exemption is to ensure that inherently safe laser products are not unnecessarily subject to the standard. In addition to the hazards resulting from laser radiation, laser equipment may also give rise to other hazards such as fire and electric shock. NOTE 3 However, the classification and other requirements of this standard are intended to address only the laser radiation hazards to the eyes and skin. Other hazards are not included within its scope. This Part 1 describes the minimum requirements. Compliance with this Part 1 may not be sufficient to achieve the required level of product safety. Laser products must conform to the applicable performance and testing requirements of the applicable product safety standards. NOTE 4 Other standards may contain additional requirements. Consideration should also be given to the intended application and user group. For example, a class 3B or class 4 laser product may not be suitable for use as a consumer product.

ICS

13.110 Gépek biztonsága

31.260 Optoelektronika. Lézerberendezések

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2008-04-01

A visszavonás napja

2019-06-19

Forrás

idt IEC 60825-1:2007; idt EN 60825-1:2007

Előd

MSZ EN 60825-1:2000, MSZ EN 60825-1:1994/A2:2001, MSZ EN 60825-1:1994/A1:2003

Utód

MSZ EN 60825-1:2015

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2006/95/EK; (LVD06); 1999/5/EK; (RTTE99)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 981658) ,

oldalszáma

101 oldal; XA kategória

ára

Nettó: 23380 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 29459 Ft
PDF (letöltés) formátum esetén (27% Áfával): 29693 Ft