Hivatkozási szám

MSZ EN 15319:2007

Dokumentumazonosító

144655

Cím

A szálerősítésű (gipsz) vakolatokkal végzett munkák tervezésének általános elvei

Angol cím

General principles of design of fibrous (gypsum) plaster works

Alkalmazási terület

This European Standard defines the principles for the design of works carried out using fibrous (gypsum) plaster products as defined in EN 13815. Fibrous (gypsum) plaster casts from the three categories of production below (see Clause 4 of EN 13815:2006) should be involved: a) ”cpp” allowing regulatory marking CE; b) “cppv” allowing regulatory marking CE; c) “ipp” either when CE marking is required; or without CE marking (see Annex D – Note 2 of EN 13815:2006). This European Standard applies to both new constructions and to the refurbishment, restructuring or conversion of existing buildings. The common fields of application of fibrous plaster are as set out in Table 1 below. Table 1 — Common fields of application of fibrous plaster Fields of application Examples Architectural effects ? decorating: cornices, pilasters, columns (see exception vii below); ? on the ceiling: flat or shaped ceilings (included suspended ceilings), coffered ceilings, vaults, domes; ? in a vertical position : flat or shaped surfaces (partitions, linings); ? encasements, casings; ? embellishments for direct or concealed lighting; ? structures to improve acoustical performance (insulation, absorption, diffusion). Technical functions ? shafts and ducts for ventilation, air conditioning, smoke extraction; ? ceiling voids and chambers for pressurization; ? structures to enhance fire safety. NOTE 1 This classification is not exclusive, as the same fibrous plaster work can have several functions. NOTE 2 Table 1 does not mention the use of fibrous plaster externally; as it can only be used under certain conditions (see 4.3.1.2). Fibrous plastering work should be capable of having the usual finishes applied directly to them (e.g. paint, wallpaper) subject to the normal preparatory work applicable for the type of finish.

ICS

91.100.10 Cement. Gipsz. Mész. Habarcs

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2007-12-01

Forrás

idt EN 15319:2007

Előd

Utód

Módosítás

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 541016) ,

oldalszáma

48 oldal; T kategória

ára

Nettó: 15850 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 19971 Ft
PDF (letöltés) formátum esetén (27% Áfával): 20130 Ft