Hivatkozási szám

MSZ HD 629.1 S2:2006

Dokumentumazonosító

140988

Cím

A 3,6/6 (7,2) kV-tól 20,8/36 (42) kV-ig terjedő névleges feszültségű erősáramú kábelek szerelvényeinek vizsgálati követelményei. 1. rész: Extrudált szigetelésű kábelek

Angol cím

Test requirements on accessories for use on power cables of rated voltage from 3,6/6 (7,2) kV up to 20,8/36 (42) kV. Part 1: Cables with extruded insulation

Alkalmazási terület

1.1 General This standard specifies performance requirements for type tests for cable accessories for use on extruded insulation power cables as specified in HD 620. Formerly, approvals of such products have been achieved on the basis of national standards and specifications and/or the demonstration of satisfactory service performance. The publication of this CENELEC standard does not invalidate existing approvals. However, products approved to such earlier standards or specifications shall not claim approval to this CENELEC standard unless specifically tested to it. It is not necessary to repeat these tests, once successfully completed, unless changes are made in the materials, design or manufacturing process, which might affect the performance characteristics. Accessories for special applications such as submarine cables, ships cables or hazardous situations (explosive environments, fire resistant cables or seismic conditions) are not included. Test methods are included in EN 61442. 1.2 Type of accessories The accessories covered by this standard are listed below: a) indoor and outdoor terminations of all designs, including terminal boxes; b) straight joints, branch joints and stop ends of all designs, suitable for use underground or in air; c) screened or unscreened plug-in type or bolted-type separable connectors capable of interfacing with bushing profiles as specified in EN 50180 and EN 50181. NOTE Joints connecting extruded insulation cables (HD 620) to paper insulated cables (HD 621) are not included. The requirements for these accessories are dealt with in HD 629.2. 1.3 Rated voltage The rated voltages Uo/U (Um) of the accessories covered by this standard are 3,6/6(7,2) - 3,8/6,6(7,2) - 6/10(12) - 6,35/11(12) - 8,7/15(17,5) - 12/20(24) - 12,7/22(24) - 18/30(36) - 19/33(36) - 20,8/36(42) kV where: Uˇo^ is the rated power-frequency voltage between conductor and earth or metallic screen, for which the cable accessory is designed; U is the rated power-frequency voltage between conductors for which the cable accessory is designed; Uˇm^ is the maximum value of the ’highest system voltage’ for which the cable accessory is designed. 1.4 Current The continuous current rating of a termination or joint for extruded insulation power cables shall be in accordance with the appropriate cable specified in HD 620 and shall be suitable for operation at the rated current and under short circuit fault conditions at the temperatures stated therein. The current rating of a separable connector is governed by the current rating of the mating bushing (see EN 50180 and EN 50181).

ICS

29.060.20 Kábelek

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2006-08-01

A visszavonás napja

2022-02-06

Forrás

idt HD 629.1 S2:2006

Előd

MSZ 1158-1:1997, MSZ 1158-1:1997/1M:2001

Utód

MSZ HD 629-1-S3:2019

Módosítás

MSZ HD 629.1 S2:2006/A1:2009

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 268559) ,

oldalszáma

29 oldal; N kategória

ára

Nettó: 11980 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 15095 Ft
PDF (letöltés) formátum esetén (27% Áfával): 15215 Ft