Szabványkereső

Hivatkozási szám, azonosító jelzet, vagy a szabványcímben előforduló kulcsszó szerinti keresés:


ICS (a szabványok nemzetközi osztályozási rendszere) szerinti keresés

Nettó ár: 7300 Ft
Az online rendelés jelenleg nem elérhető.
Alapadatok
Hivatkozási szám
MSZ EN ISO 8502-2:2006
Dokumentumazonosító
140132
Cím
Acélfelületek előkészítése festékek és hasonló termékek felhordása előtt. Vizsgálatok a felületi tisztaság értékelésére. 2. rész: A tisztított felületeken lévő klorid laboratóriumi meghatározása (ISO 8502-2:2005)
Angol cím
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2005)
Alkalmazási terület
ISO 8502-2:2005 describes a method for the determination of chloride-containing salts that are readily soluble in water and are present on a steel surface. The method is also applicable to previously coated surfaces. It will normally be used in a laboratory using washings sampled from surfaces on site. ISO 8502-2:2005 is applicable to the determination of salts that have been deposited on the steel surface before, during or after the cleaning operations. ISO 8502-2:2005 is not applicable to surfaces treated with chromate, nitrite or amine, which are commonly used as inhibitors in the water when wet blast-cleaning. This is because a chromate concentration of 10 mg/l or greater or a nitrite concentration of 20 mg/l or greater in the wash water interferes with the determination of the chloride. Also the amine inhibitors can form a hydroxide boundary layer (not water soluble) over the substrate and prevent the water from contacting the underlying salt for its removal. An iron(III) ion concentration of 10 mg/l also interferes with the determination, but the iron(III) ions are concentrated in the rust deposits, which are removed from the test solution by filtration.
ICS
25.220.10 Felület-előkészítés
A szabvány nyelve
angol
Az érvényesség kezdete
2006-04-01
A visszavonás napja
2017-08-01
További adatok
Forrás
idt EN ISO 8502-2:2005; idt ISO 8502-2:2005
Módosítás
SZK-közlemények
Kapcsolódó európai jogszabály
Kereskedelmi adatok
A szabvány
kapható formátuma
Papír ,
PDF (letöltés) (a fájl mérete: 260705) ,
oldalszáma
11 oldal; F kategória
ára
Nettó: 7300 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 9198 Ft
PDF (letöltés) formátum esetén (27% Áfával): 9271 Ft
Szabvány életútja
Megtekintett szabvány

MSZ EN ISO 8502-2:2006

2006-04-01 - 2017-08-01