Hivatkozási szám

MSZ EN 60034-9:2005

Dokumentumazonosító

138283

Cím

Villamos forgógépek. 9. rész: Zajhatárértékek (IEC 60034-9:2003, módosítva)

Angol cím

Rotating electrical machines. Part 9: Noise limits (IEC 60034-9:2003, modified)

Alkalmazási terület

This part of IEC 60034: – specifies test methods for the determination of sound power level of rotating electrical machines; – specifies maximum A-weighted sound power levels for factory acceptance testing of rotating electrical machines in accordance with IEC 60034-1, having methods of cooling according to IEC 60034-6 and degrees of protection according to IEC 60034-5, and having the following characteristics: • standard design, either a.c. or d.c., without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level; • rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA); • speed not greater than 3 750 min-1. Excluded are a.c. motors supplied by converters. For these conditions see IEC 60034-17 for guidance. The object of this standard is to determine maximum A-weighted sound power levels, LWA in decibels, dB, for airborne noise emitted by rotating electrical machines of standard design, as a function of power, speed and load, and to specify the method of measurement and the test conditions appropriate for the determination of the sound power level of the machines to provide a standardized evaluation of machine noise up to the maximum specified sound power levels. This standard does not provide correction for the existence of tonal characteristics. Sound pressure levels at a distance from the machine may be required in some applications, such as hearing protection programs. Information is provided on such a procedure in Clause 7 based on a standardized test environment. NOTE 1 This standard recognizes the economic reason for the availability of standard noise-level machines for use in non-critical areas or for use with supplementary means of noise attenuation. NOTE 2 Where sound power levels lower than those specified in Tables 1 or 2 are required, these should be agreed between the manufacturer and the purchaser, as special electrical, mechanical, or acoustical design may involve additional measures.

ICS

17.140.20 Gépek és berendezések zajkibocsátása

29.160.01 Forgógépek általában

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2005-09-01

Forrás

idt EN 60034-9:2005; idt IEC 60034-9:2003

Előd

MSZ EN 60034-9:1998

Utód

Módosítás

MSZ EN 60034-9:2005/A1:2007

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2014/35/EU (LVD14); 2006/95/EK; (LVD06)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 383202) ,

oldalszáma

16 oldal; H kategória

ára

Nettó: 8640 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 10886 Ft
PDF (letöltés) formátum esetén (27% Áfával): 10973 Ft