Hivatkozási szám

MSZ EN 14462:2005

Dokumentumazonosító

137257

Cím

Felületkezelő berendezések. Felületkezelő berendezések zajvizsgálati előírása, beleértve a kiegészítő kezelőberendezéseket is. 2. és 3. pontossági osztály

Angol cím

Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3

Alkalmazási terület

This standard specifies all the information necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the airborne noise emission of surface treatment machines as stated in annex A. Surface treatment machines include such as but not limited to 3 machines for cleaning and pretreatment of industrial item surfaces, 3 machinery for coating and colour mixing, 3 coating plants and 3 dryers, ovens and evaporating equipment. This standard describes the determination of emission sound pressure levels at work stations or other specified positions as well as the determination of sound power levels for surface treatment machines as stated in annex A. This can be small single units (e.g. handheld atomising spraying equipment) and also complex machines with large dimensions (e.g. machines for cleaning and pretreatment of industrial item surfaces, spray booths, dryers), which could also be linked. In case of very large machines as defined in 3.10 the determination of sound power level may be very complicated or cannot be done with a reasonable amount of work. Therefore in this standard, the measurement for very large machines is simplified by determining an averaged emission sound pressure level instead of the sound power level. This standard specifies noise measurement methods, installation/mounting and operation conditions that shall be used for the test. The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used (see 5.1 and 6.1). Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3). For continuous flow dryers for paper, board and foil (see prEN 13023). This standard applies to surface treatment machines manufactured after the date of issue of this standard.

ICS

17.140.20 Gépek és berendezések zajkibocsátása

25.220.01 Felületkezelés és -bevonás általában

A szabvány nyelve

angol

Az érvényesség kezdete

2005-06-01

A visszavonás napja

2009-07-01

Forrás

idt EN 14462:2005

Előd

Utód

MSZ EN 14462:2005+A1:2009

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

(MAC98)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1007249) ,

oldalszáma

31 oldal; P kategória

ára

Nettó: 12520 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 15775 Ft
PDF (letöltés) formátum esetén (27% Áfával): 15900 Ft