Hivatkozási szám

MSZ EN 10025-2:2005

Dokumentumazonosító

137237

Cím

Melegen hengerelt termékek szerkezeti acélokból. 2. rész: Ötvözetlen szerkezeti acélok műszaki szállítási feltételei

Angol cím

Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels

Alkalmazási terület

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 to 6 (chemical composition) and Tables 7 to 9 (mechanical properties) in the delivery conditions as given in 6.3. Three engineering steels are also specified in this document (see Tables 3 and 5) (chemical composition) and Table 8 (mechanical properties). This document does not apply to structural hollow sections and tubes (see EN 10210-1 and EN 10219-1). The technical delivery conditions apply to thicknesses 3 3 mm and L 150 mm for long products of steel grade S450J0. The technical delivery conditions apply to thicknesses L 250 mm for flat and long products of all other grades and qualities. In addition for flat products of qualities J2 and K2 the technical conditions apply to thicknesses L 400 mm. Products made of steel grades S185, E295, E335 and E360 cannot be CE marked. The steels specified in this Part 2 are not intended to be heat treated except products delivered in delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3). NOTE 1 Semi-finished products which are to be converted to rolled finished products conforming to this document should be the subject of special agreement at the time of the enquiry and order. The chemical composition can also be agreed at the time of the order, however the values should be within the limits of Tables 2 and 3. NOTE 2 For certain grades and product forms suitability for particular applications may be specified at the time of the enquiry and order (see 7.4.2, 7.4.3 and Table 10).

ICS

77.140.10 Hőkezelhető acélok

77.140.45 Ötvözetlen acélok

77.140.50 Lapos acéltermékek és féltermékek

Műszaki Bizottság

A szabvány nyelve

magyar

Az érvényesség kezdete

2005-06-01

A visszavonás napja

2020-06-01

Forrás

idt EN 10025-2:2004

Előd

MSZ EN 10025:1998

Utód

MSZ EN 10025-2:2020

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 342190) ,

oldalszáma

33 oldal; XY kategória

ára

Nettó: 15570 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 19618 Ft
PDF (letöltés) formátum esetén (27% Áfával): 19774 Ft