Hivatkozási szám

MSZ EN 60684-3-340-342:2003

Dokumentumazonosító

126663

Cím

Hajlékony szigetelőcsövek. 3. rész: Az egyes csőtípusok előírásai. 340–342. lapok: Tágítható, szövött, poli(etilén-tereftalát) textilcsövek (IEC 60684-3-340–342:2003)

Angol cím

Flexible insulating sleeving. Part 3: Specifications for individual types of sleeving. Sheets 340 to 342: Expandable braided polyethylene terepthalate textile sleeving (IEC 60684-3-340 to 342:2003)

Alkalmazási terület

This standard gives the requirements for sleeving having the property of expanding its internal diameter when compressed longitudinally and thereafter returning to its initial diameter after release of the compressing force. It is constructed of polyethylene terephthalate monofilament yarns suitably processed to provide the mechanical ability to conform in the manner described above. These sleevings have been found suitable for use at temperatures up to 130 °C. This sleeving is normally supplied in internal diameters between 6 mm and 63 mm and in three levels of wall thickness (thin, medium, and thick). It is normally supplied in the following colours: black, white, brown, red, orange, yellow, green, blue, grey, and natural. Because of its open construction, this sleeving is normally used to provide air-space insulation. Therefore, no requirement for breakdown voltage is specified in this standard. (Any value for this property should be given in the purchase contract, but a typical value is 1,5 kV/mm wall thickness, although a linear relationship cannot be assumed.) However, it serves to provide mechanical protection to circuit components such as wires, sleeves, and flat cable over which it is applied as a containing wrap or harness. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

ICS

29.035.20 Műanyag és gumi szigetelőanyagok

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2003-11-01

Forrás

idt IEC 60684-3-340-342:2003; idt EN 60684-3-340-342:2003

Előd

MSZ EN 60684-3-340-342:1999

Utód

Módosítás

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 206505) ,

oldalszáma

12 oldal; F kategória

ára

Nettó: 7300 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 9198 Ft
PDF (letöltés) formátum esetén (27% Áfával): 9271 Ft