Hivatkozási szám

MSZ EN 61058-1:2002

Dokumentumazonosító

122664

Cím

Készülékkapcsolók. 1. rész: Általános követelmények (IEC 61058-1:2000 + A1:2001, módosítva)

Angol cím

Switches for appliances. Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified)

Alkalmazási terület

1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirements for switches. NOTE 5 Throughout this standard, the word "appliance" means "appliance or equipment". NOTE 6 This part of IEC 61058 is applicable when testing incorporated switches. When other types of switches for appliances are tested, this part is applicable together with the relevant IEC 61058-2. This part may, however, be applied for other types of switches which are not mentioned in IEC 61058-2, provided that the electrical safety is not disregarded. 1.2 This standard applies to switches intended to be incorporated in, on or with an appliance. 1.3 This standard also applies to switches incorporating electronic devices. 1.4 This standard also applies to switches for appliances such as ? switches intended to be connected to a flexible cable (cord switches); NOTE In this document, the word "cable" means "cable or cord". ? switches integrated in an appliance (integrated switches); ? switches intended to be mounted apart from the appliance (independently mounted switches) other than those within the scope of IEC 60669-1; ? change-over selectors for which, however, particular requirements are given in IEC 61058-2.

ICS

29.120.40 Kapcsolók

Műszaki Bizottság

A szabvány nyelve

magyar

Az érvényesség kezdete

2002-11-01

A visszavonás napja

2021-05-25

Forrás

idt EN 61058-1:2002; idt IEC 61058-1:2000; idt IEC 61058-1:2000/A1:2001

Előd

MSZ EN 61058-1:1994

Utód

MSZ EN IEC 61058-1:2018

Módosítás

MSZ EN 61058-1:2002/A2:2008

SZK-közlemények

Kapcsolódó európai jogszabály

2006/95/EK; (LVD06); 2014/35/EU (LVD14)

A szabvány

kapható formátuma

Papír ,
PDF (letöltés) (a fájl mérete: 1039936) ,

oldalszáma

153 oldal; XC kategória

ára

Nettó: 28640 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 36086 Ft
PDF (letöltés) formátum esetén (27% Áfával): 36373 Ft