Hivatkozási szám

MSZ EN 60730-2-19:2002

Dokumentumazonosító

121557

Cím

Automatikus villamos szabályozó- és vezérlőkészülékek háztartási és hasonló jellegű alkalmazásra. 2-19. rész: Villamos működtetésű olajszelepek egyedi előírásai, beleértve a mechanikai követelményeket (IEC 60730-2-19:1997+A1:2000, módosítva)

Angol cím

Automatic electrical controls for household and similar use. Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997+A1:2000, modified)

Alkalmazási terület

This clause of part 1 is not applicable. Replacement: 1.1 This part 2 of IEC 60730 applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. This part 2 also applies to electrically operated oil valves using NTC or PTC thermistors, requirements for which are contained in annex J. 1.1.1 This part 2 applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of electrically operated oil valves used in, or in association with, household or similar equipment. This part 2 is also applicable to controls for appliances within the scope of IEC 60335-1. Throughout this part 2 the word "equipment" means "appliance and equipment". This part 2 does not apply to electrically operated oil valves designed exclusively for industrial applications. Electrically operated oil valves for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this part 2. This part 2 identifies a number of mechanical features as "under consideration". Until these mechanical requirements are incorporated in this part 2, each country using this part 2 will have to quantify these requirements. Compliance of an electrically operated oil valve with this part 2 does not imply that the valve is acceptable without further tests for these mechanical features. 1.1.2 This part 2 applies to manual controls when such are electrically and/or mechanically integral with electrically operated oil valves. Requirements for manual switches not forming part of an electrically operated oil valve are contained in IEC 61058-1. This part 2 does not apply to electrically operated oil valves of nominal connection size above DN 150. Hereinafter, the term "valve" is used to denote an electrically operated oil valve (including prime mover and valve body). 1.1.3 An electric actuator that is submitted to the testing laboratory in combination with an oil valve will be evaluated under this part 2. A separate electric actuator is evaluated under IEC 60730-2-14, which provides particular requirements for electric actuators.

ICS

97.120 Automatikus vezérlések háztartási alkalmazásra

Műszaki Bizottság

A szabvány nyelve

angol

Az érvényesség kezdete

2002-06-01

A visszavonás napja

2024-09-01

Forrás

idt IEC 60730-2-19:1997/A1:2000; idt IEC 60730-2-19:1997; idt EN 60730-2-19:2002

Előd

Utód

Módosítás

MSZ EN 60730-2-19:2002/A11:2005, MSZ EN 60730-2-19:2002/A2:2008

Kiegészítő információk

SZK-közlemények

Kapcsolódó európai jogszabály

2006/95/EK; (LVD06); 2014/35/EU (LVD14)

A szabvány

kapható formátuma

Papír ,

oldalszáma

32 oldal; P kategória

ára

Nettó: 12520 Ft
Bruttó:
Papír formátum esetén (5% Áfával): 15775 Ft