MSZ EN IEC 62053-24:2021

Villamos fogyasztásmérő berendezések. Kiegészítő követelmények. 24. rész: Elektronikus fogyasztásmérők alapharmonikus frekvenciájú meddő energia mérésére (0,5S, 1S, 1-es, 2-es és 3-as pontossági osztály) (IEC 62053-24:2020)

Electricity metering equipment. Particular requirements. Part 24: Static meters for fundamental component reactive energy (classes 0,5S, 1S, 1, 2 and 3) (IEC 62053-24:2020)


This part of IEC 62053 applies only to static var-hour meters of accuracy classes 0,5 S, 1 S, 1, 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only. This document uses a conventional definition of reactive energy where the reactive power and energy is calculated from the fundamental frequency components of the currents and voltages only (see Clause 3). NOTE 1 This differs from IEC 62053-23, where reactive power and energy is only defined for sinusoidal signals. In this document reactive power and energy is defined for all periodic signals. Reactive power and energy is defined in this way to achieve proper reproducibility of measurements with meters of different designs. With this definition, reactive power and energy reflects the generally unnecessary current possible to compensate with capacitors rather than the total unnecessary current. NOTE 2 For other general requirements, such as safety, dependability, etc., see the relevant IEC 62052 or IEC 62059 standards. This document applies to electricity metering equipment designed to: - measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC; NOTE 3 For AC electricity meters, the voltage mentioned above is the line-to-neutral voltage derived from nominal voltages. See IEC 62052-31:2015, Table 7; - have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays; - operate with integrated or detached indicating displays, or without an indicating display; - be installed in a specified matching socket or rack; - optionally, provide additional functions other than those for measurement of electrical energy. Meters designed for operation with low power instrument transformers (LPITs as defined in the IEC 61869 series) may be considered as compliant with this document only if such meters and their LPITs are tested together and meet the requirements for directly connected meters. NOTE 4 Modern electricity meters typically contain additional functions such as measurement of voltage magnitude, current magnitude, power, frequency, power factor, etc.; measurement of power quality parameters; load control functions; delivery, time, test, accounting, recording functions; data communication interfaces and associated data security functions. The relevant standards for these functions may apply in addition to the requirements of this document. However, the requirements for such functions are outside the scope of this document. Túl hosszú scope

Általános információk

Érvényes
angol
: 2021-08-01

17.220.20 - Villamos és mágneses mennyiségek mérése 91.140.50 - Villamosenergia-ellátó rendszerek

MSZT/MB 842  Berendezések villamos energia mérésére és terhelésszabályozásra

: idt EN IEC 62053-24:2021; idt IEC 62053-24:2020

: MSZ EN IEC 62053-24:2021/A11:2021

Vásárlás

: 8 540,0 Ft
(papír , PDF-fájl-letöltés)



Szabvány életútja

Megtekintett szabvány
MSZ EN IEC 62053-24:2021

2021-08-01

Utódok

Jelenleg nincsenek utódok