MSZ EN ISO 15156-3:2016

Kőolaj- és földgázipar. A kőolaj- és földgázkitermelés Hˇ2^S-tartalmú környezetében használt anyagok. 3. rész: Repedésálló CRA-k (korrózióálló ötvözetek) és egyéb ötvözetek (ISO 15156-3:2015)

Petroleum and natural gas industries. Materials for use in Hˇ2^S-containing environments in oil and gas production. Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)


This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. This part of ISO 15156 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC). This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156-1:2015, Clause 5. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. INTERNATIONAL STANDARD ISO 15156-3:2015€

Általános információk

Visszavont
angol
: 2016-03-01
: 2021-03-01

75.180.10 - Kutató-, fúró- és kitermelőberendezések 77.060 - Fémek korróziója

MSZT/MCS 333  Kőolaj- és földgázipari anyagok és berendezések

: idt ISO 15156-3:2015; idt EN ISO 15156-3:2015


Vásárlás

: 16 130,0 Ft
(papír , PDF-fájl-letöltés)



Szabvány életútja

Megtekintett szabvány
MSZ EN ISO 15156-3:2016

2016-03-01 - 2021-03-01